Join Date: May 2004
Location: Morganville, NJ
Thanked 17 Times in 14 Posts
An auto trans replacement in a gen 7, figure the 8-10 hours labor, then depending on where the unit comes from $2800-$3500. And in the case of Honda units, you do get what you pay for.
The cost of the clutch, provided it didn't need a flywheel, could come a bit lower. The last time I looked $1800 before tax was a pretty close amount.
Here's list prices if you were paying a shop to do the clutch w/flywheel
CLU 320.58 (includes pressure plate and disc)
Pilot bearing 37.85
release bearing 45.15
I always recommend these as well: release fork and pivot
Parts at retail: 1077.01
10 hours if $100/hr 1000.00
If the flywheel is good, no excessive cracks, hot spots, or play between the halves, take off that 635.00. That still leaves you at near 1500 before taxes, fluids as the trans needs draining before removal and anything else that might come up with an job like that on a higher mileage car.
Sapphire blue '04 V6 6 speed w/ full HFP, comptech ss, momo shadow, TL-S 27.2h/20 bars, intake spacer, retro chrome MH1 HIR2 highs, hella DE fogs, EBC Ultimax, subwoofer/amp, infinity rears, HD Radio, aux adapter, navi conversion.
Vermilion 1999 SVT F150 Lightning, Sylvania/Visteon Xenarc HID headlamps, '01 L turn/marker lamps, PIAA fogs, '01 up Bilstein shocks, all Pioneer speakers, Clarion subwoofer. All Redline fluids.
Silverstone 2003 Honda S2000, bone stock