Sway Bar Project

[XLR8]

I want to order my front and rear sway bar. I have the part numbers for the 20mm sway bar (thanks to the FAQ) but can't seem to locate part # for the front solid bar.

I'm going to start with the front solid bar and 20mm rear bar then eventually the v6 6speed strut tower bar. Thanks guys, I probably won't get pics of the install since I'll be doing it at work on a lift. Got a tech buddy that is willing to help me do the front one after work. :thmsup: I'll let you know how it goes

[The Pope]

Search function is your friend! :naughty:

http://www.driveaccord.net/forums/showthread.php?t=11154&highlight=bar&page=2

look at post #26 in this thread.

[XLR8]

I tried doing a search, but thanks anyway. Ordering hopefully tonight.

[XLR8]

I've been looking through posts about the front sway bar. Did you have to order any extra parts for the front like you do the rear sway bar? Or do you just need to order the bar itself for the front?

[abmn]

you need the attachment brackets. bigger pipe, bigger rubber and bracket

[VTECaddict]

bracket is the same (part numbers confirm this). you only need new bushings.

[XLR8]

What is the part number for the bushing in the front? Sorry, it's late and dont feel like searching :(

Heres what I got so far:

20mm bar parts needed:

1 of 52300-SEP-A11
2 of 52306-SEP-A11
2 of 52308-S3M-A00

and

2007 front p/n 51300-SEP-A21 (solid bar)

then the 14mm swivel/flex socket.

What else is necessary? Appreciate the help!

[The Pope]

You should be able to find all your part numbers here for the front sway bar install.

http://www.acuraautomotiveparts.org/acura/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=TL&catcgry2=2007&catcgry3=4DR+TYPE-S&catcgry4=KA6MT&catcgry5=FRONT+LOWER+ARM&ListAll=All&vinsrch=no&systemcomp=List%20All&vinnoT=&trim=&trans=&view=normal

For the front, you'll need 2pc of item #3.

[Splash]

51306-SEP-A01 BUSH, FR. STABILIZER HOLDER (27.2MM) 2.09 1.66

51308-SDA-A00 BRACKET, FR. STABILIZER 2.31 1.84

http://www.acuraoemparts.com/ is a great source.

http://www.acuraoemparts.com/delray/jsp/prddisplay.jsp?inputstate=5&catcgry1=TL&catcgry2=2007&catcgry3=4DR+TYPE-S&catcgry4=KA6MT&catcgry5=FRONT%2BLOWER%2BARM&ListAll=All&vinsrch=no
is a link for the drawing on the front swaybar.

http://www.acuraoemparts.com/delray/jsp/prddisplay.jsp?inputstate=5&catcgry1=TL&catcgry2=2007&catcgry3=4DR+TYPE-S&catcgry4=KA6MT&catcgry5=REAR%2BLOWER%2BARM&ListAll=All&vinsrch=no
is a link for the rear.

[XLR8]

alright so 2 people are saying no brackets needed just bushings but now you are saying I need brackets too.

[frenzal]

Come on, just buy the brackets....they are what, 5$ each?

They'll be new, just like the bar and bushings...:thmsup:

[2006AS]

alright so 2 people are saying no brackets needed just bushings but now you are saying I need brackets too.

You don't need the brackets. At least I didn't need them for my '06 and I don't think that your car is any different :D

[njdriver04]

Planning on installing the tl-s front sway bar, Anyone know the torque specs to reinstall the subframe and the sway bar brackets? Should I use lock tight?

Also planning to do the rear sway same torque specs??

thankss

[ypsibird]

Planning on installing the tl-s front sway bar, Anyone know the torque specs to reinstall the subframe and the sway bar brackets? Should I use lock tight?

Also planning to do the rear sway same torque specs??

thankss

I would recommend that you go to the Neuspeed web site and download the pdf for the front sway bar install. It will have all the torque specs for the front sway bar installation. I don't recall if they have similar instructions for the rear bar, but they probably do.

[njdriver04]

duhh, i knew i saw the specs somewhere, thankks

[2006AS]

This should help:

http://www.driveaccord.net/forums/showthread.php?t=6568