09 TSX Rims/Tires on 08 V6 Coupe?pittpanther 07-09-2008, 02:40 PM Hello all... not a big fan of my 08 V6 Coupe's rims - but I prefer to stay with the OEM look. I really like the 09 TSX Rims... would this be a simple swap out for the stock Rims? I mostly am concerned about the TPMS integration. Also, could the center caps be swapped as well? Thanks! pittpanther 07-09-2008, 03:00 PM Here is a quick photochop... TSX wheels looks a little blue-ish, but you get the picture. Plus, I also *hate* having to clean the 10 spoke wheels! It's so difficult to get behind the spokes. http://www.datability.biz/images/Acc.jpg http://www.datability.biz/images/AccTSX.jpg Accordlover 07-09-2008, 03:17 PM You can swap the center caps, the TPMS sensors may have to be re-calibrated by your dealer. If the wheel is identical in size then you won't have to do this. NOTE: I just realized you'll be stepping down an inch in wheel size as the TSX's wheel's are 17's. You will have to get the TPMS sensors re-calibrated by a dealer. ryan mcgrogan 07-09-2008, 03:21 PM sell your wheels to another pittsburgh fan! pm me!! pittpanther 07-09-2008, 03:44 PM You can swap the center caps, the TPMS sensors may have to be re-calibrated by your dealer. If the wheel is identical in size then you won't have to do this. NOTE: I just realized you'll be stepping down an inch in wheel size as the TSX's wheel's are 17's. You will have to get the TPMS sensors re-calibrated by a dealer. Thanks a bunch for the info. I should be able to install the TSX wheels/tires at the house and drive it to the dealer for the re-cal correct? pittpanther 07-09-2008, 03:45 PM sell your wheels to another pittsburgh fan! pm me!! Ryan - I will let you know if I sell them :)... although, I may hold on to 'em. Thanks for the interest though. Darth Do'Urden 07-09-2008, 03:52 PM I sympathize with wanting to stay with a stock look, but I'd go for some much better looking wheels than the TSX. Then again I like how the V-6 Coupe wheels look, so.... arasheht 07-09-2008, 11:51 PM have you looked into the gunmetal rims offered on the I4 EX-Ls? http://www.hondaaccordforum.com/upfiles/14924/2EABCF6E3FD94AC099C541CE98C0E451.jpg and my own.... http://munno.net/honda/january2008.jpg clewttu 07-10-2008, 05:51 AM yuck, to each their own though i do find it funny when people step down in rim size cuz all people ever seem to want to do is go bigger than the next guy | |