Hey guys im new to this forum so hello all. im very familiar with the search and i made sure to search my dilema before posting, but to my dismay i found no info on my issue.

I have an 07 Accord SE. The driver's window works fine. However, the other 3power windows stopped working. When I press the buttons, I can hear the click each time but the regulators won't budge. The "window lock" button was released. I also checked the fuse and it's fine. Where should I check next?
i know this has happened to others and im not quite sure why i cant find anything on it. Any ideas on the matter will be very helpful

Thanks in advance,
Issac

Not sure if this will help, but here is the procedure for reseting the power windows from the service manual:

1. Turn ignition on.

2. Move driver's window all the way down using the switch.

3. Open the driver's door.

NOTE: steps 4-7 must be done within 5 seconds of each other.

4. Turn the ignition switch off.

5. Push and hold the driver's window down switch.

6. Turn the ignition switch on.

7. Release the driver's window down switch.

8. Repeat steps 4-7 three more times.

9. Wait 1 second.

10. Confirm that AUTO UP and AUTO DOWN do NOT work. If they work, go back to step 1.

11. Move the driver's window all the way down by holding the driver's window down switch to the auto down position.

12. Pull up and hold the driver's window up switch to the auto up position until the window reaches the fully closed position, then continue to hold the switch for 1 second.

13. Confirm that the power window master switch is reset by using the driver's window auto up and down function.

Hope this helps.

Not sure if this will help, but here is the procedure for reseting the power windows from the service manual:

1. Turn ignition on.

2. Move driver's window all the way down using the switch.

3. Open the driver's door.

NOTE: steps 4-7 must be done within 5 seconds of each other.

4. Turn the ignition switch off.

5. Push and hold the driver's window down switch.

6. Turn the ignition switch on.

7. Release the driver's window down switch.

8. Repeat steps 4-7 three more times.

9. Wait 1 second.

10. Confirm that AUTO UP and AUTO DOWN do NOT work. If they work, go back to step 1.

11. Move the driver's window all the way down by holding the driver's window down switch to the auto down position.

12. Pull up and hold the driver's window up switch to the auto up position until the window reaches the fully closed position, then continue to hold the switch for 1 second.

13. Confirm that the power window master switch is reset by using the driver's window auto up and down function.

Hope this helps.

thefourth., thank you

Unfortunatly that did not help .i tried it twice, reset yet didnt fix the other windows.
Please someone help me out, its gettin warm out..

OP,

This thread is moved to the Problems & Solutions forum, and your other thread is considered a Double Post for the same thread, and is deleted as per forum rule.

Welcome aboard, and sorry to hear about your problem.

OP,

This thread is moved to the Problems & Solutions forum, and your other thread is considered a Double Post for the same thread, and is deleted as per forum rule.

Welcome aboard, and sorry to hear about your problem.

Hey thank you for that, i couldnt delete thread... i found the tech and solution after.

anyone!?

Does anybody on this forum have any ideas?? even a single one besides 'Thefourth'??

Bring it to the dealer if it is under warranty...
My rear right window make some buzzing noise and they replace the electric motor under warranty.

Hey guys im new to this forum so hello all. im very familiar with the search and i made sure to search my dilema before posting, but to my dismay i found no info on my issue.

I have an 07 Accord SE. The driver's window works fine. However, the other 3power windows stopped working. When I press the buttons, I can hear the click each time but the regulators won't budge. The "window lock" button was released. I also checked the fuse and it's fine. Where should I check next?
i know this has happened to others and im not quite sure why i cant find anything on it. Any ideas on the matter will be very helpful

Thanks in advance,
Issac

Can you open the other windows with either the buttons on the driver's door or the buttons on each individual door? My first guess is that it's a problem with the window lock feature.

The exact same thing happened to me today. Did you ever find a solution? Thank you.

unfortunately you're going to need to do diagnosis on the b-can network to see where the signals are being lost.

You'll need the factory manual to do it, with the following, the HDS, a scanner that can read the b-can system, or there's a manual mode mentioned in the manual to get information out of the system.

Have you tried to disconnect the battery? Negative first, then positive, hold the two cables against one another for at least a minute. Then put the positive back on, then negative and try and reset the windows again.