Has anyone replaced the MICU (multiplex) before (instructions and where to buy?? I've fried mine trying to hook up LEDs to my interior lights.

EDIT: According to Vapor40 (http://www.honda-tech.com/showpost.php?p=34911788&postcount=4),
...it's suppose to be the entire fusebox listed as illustration no. 7 (Honda Part No. 38200-SDB-A21):
http://www.hondaautomotiveparts.com/auto/jsp/mws/catimgs/14SDA0_B1310.gif

Any help would be great!

EDIT 2: Alright after more researching (thanks to alldatadiy.com (http://www.alldatadiy.com/alldata/AFI%7EG%7EC40355%7ER0%7EOD%7EN/0/41746505/41746506/41746536/41746537/34853741/34857029/34857030/56195368/55056661/103844512)), I've confirmed that the mutliplex is in the drivers side cabin fuse box, and the problem is probably the multiplex... as shown below

Multiplex controls
(note input signal: door switch, output signal: door courtesy light)
http://www.alldatadiy.com/alldata/AFI~G~C40355~R0~OB0~P4R0H~N/0/41746505/41746506/41746536/41746537/34853741/34857029/34857030/56195368/55056661/103844512/118522569/118522579

Diagram of the under-dash fuse/relay box
(Note: MICU built into the under-dash fuse/relay box)
http://www.alldatadiy.com/alldata/AFI~G~C40355~R0~OB0~P4R0H~N/0/41746505/41746506/41746536/41746537/34853741/34857029/34857030/56195368/56195379/118517645


Just like to share my findings =) Now to hunt down the part, and directions for replacing the entire cabin fuse box...

Well it's been awhile, but I'm happy to say that I installed it and the door works perfectly now!