cant find the thread on the license plate lights, dome lights, and map lights. I was wondering if someone can tell me what the sizes for the lights are on each one. If you can send me a link to the site or the thread that would be sweet. Also is there a DIY for the license plate? thank you so much and sorry if its like a stupid question. I tried to search for it i tried led lights, map lights, v leds. with no avail

Map and dome lights are 3175.
http://www.v-leds.com/DE3175-3175-LED/c122281-1-2/
http://www.superbrightleds.com/festoon.html

License plate, glove box, and trunk are 194/168/158, all have the same base.
http://www.v-leds.com/194-168-158-LED/c122256-1-2/
http://www.superbrightleds.com/mini-wedge.html

Visor vanity mirrors are these.
http://www.v-leds.com/Shop/Control/fp/SFV/32481

To get out the license plate light, use a screwdriver to pry off the clear cover, grab the bulb, and just pull straight down.

I have used both v-leds and superbrightleds and have gotten good service and fast shipping from both.

seriously thank you man

Map and dome lights are 3175.
http://www.v-leds.com/DE3175-3175-LED/c122281-1-2/
http://www.superbrightleds.com/festoon.html

License plate, glove box, and trunk are 194/168/158, all have the same base.
http://www.v-leds.com/194-168-158-LED/c122256-1-2/
http://www.superbrightleds.com/mini-wedge.html

Visor vanity mirrors are these.
http://www.v-leds.com/Shop/Control/fp/SFV/32481

To get out the license plate light, use a screwdriver to pry off the clear cover, grab the bulb, and just pull straight down.

I have used both v-leds and superbrightleds and have gotten good service and fast shipping from both.


which ones were brighter?

http://www.modifiedlife.com/2009-honda-accord-coupe-car-light-bulb-size-guide/

this chart has all the bulb sizes for our car

which ones were brighter?

It all depends on how many LEDs you are running. Here's what I have.

Dome light
http://v-leds.com/Interior-LED/DomeMap-LED/Blue-LED/BLUE-M-SMT-16-LED-DOME-p5907379-1-2.html

Map lights (mine are white but V-LEDs is currently sold out, this is the same bulb but in blue)
http://www.v-leds.com/Interior-LED/DomeMap-LED/Blue-LED/BLUE-MSMT-6-LED-DOME-p5913213.html

Visor vanity mirrors (mine are 5k white, again sold out, same bulb different color)
http://www.v-leds.com/Interior-LED/Vanity-LED/HI-POWER-SMT-3-LED-HID-p4481128.html

License plate
http://www.v-leds.com/Exterior-LED/CornerSide-Marker-LED/White-LED/2-HID-WHITE-HIGH-POWER-p4481133-1-2.html

Trunk (last one on page, Cool White WLED-CWHP15-T)
http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=CAR#WLED-x-x

Glove box (first one on page, Cool White WLED-CWHP6)
http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=CAR&keywords=&cart_id=4910558.7922&next=50

can post up some picks of them im really curious to see what it will look like...thanks alot man ur really helpful.

also do u have to take out the fuse when you want to install the lights or is it just a precaution and rarely ever short circuits

I'll try to get some pics later tonight. You don't need to pull a fuse, but I guess you can if you are worried about blowing one. I've never blown a fuse by changing a bulb in 15 years of driving, but people on here seem to. I would just make sure the light you are changing is off, pull the bulb, install the new bulb, and turn the light on the make sure the polarity is correct. If the bulb doesn't turn on, turn the light back off, flip the bulb 180 degrees, and retry it.

also do u have to take out the fuse when you want to install the lights or is it just a precaution and rarely ever short circuits

If there is a short you're just going to blow the fuse the second you put it in

Ok, here's the pics of my LEDs. My only camera is a point and shoot, I don't have a tripod, and I'm not even an amateur photographer, so the pics aren't that great.

Front seats and back seats, blue dome. Brightness in pic is pretty accurate but color is washed out, it is more blue.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062622.jpg

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062621.jpg

Front seats, white maps. Again, brightness is pretty accurate. Color is a little washed out but is pretty close, in person it's a bit whiter.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062623.jpg

Visor vanity mirrors, 5k white. Brightness and color are accurate.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062631.jpg

Glove box, white. Brightness and color are pretty accurate. You can see the OEM interior illumination too.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062625.jpg

Trunk, white. Brightness and color are pretty accurate.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062629.jpg

License plate, white. Probably most accurate brightness and color of all the pics.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062630.jpg

License plate, white. Probably most accurate brightness and color of all the pics.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062630.jpg

first of all thanks alot those pics really help.....
second... can you explain how to install the lights for the license plate?

Map and dome lights are 3175.Visor vanity mirrors are these.
http://www.v-leds.com/Shop/Control/fp/SFV/32481


This link doesn't work. I'm really interested in these.

http://www.modifiedlife.com/2009-honda-accord-coupe-car-light-bulb-size-guide/

this chart has all the bulb sizes for our car
Great link! unforunately I dont see the vanity bulbs listed..


Visor vanity mirrors (mine are 5k white, again sold out, same bulb different color)
http://www.v-leds.com/Interior-LED/Vanity-LED/HI-POWER-SMT-3-LED-HID-p4481128.html

You need two of these for each visor right??

first of all thanks alot those pics really help.....
second... can you explain how to install the lights for the license plate?
Its fairly simple the clear lens kindsa fits inside of this black plastic housing... slide a flat tip screw driver inbetween the clear lense and the black plastic and pry out the clear lens... the clear lens will come right out and you put the bulb in. This may take some finessing but its extremely strong and will take a lot to break.

Worst case scenario its $5 at the dealer for a new one, but really u'd have too be pretty retarded to be able to break it. If you need pics of what I'm refering to let me know and I'll take a few tonight. but really its extreemly easy to see it when you do it. lemmie kno.

Its fairly simple the clear lens kindsa fits inside of this black plastic housing... slide a flat tip screw driver inbetween the clear lense and the black plastic and pry out the clear lens... the clear lens will come right out and you put the bulb in. This may take some finessing but its extremely strong and will take a lot to break.

Worst case scenario its $5 at the dealer for a new one, but really u'd have too be pretty retarded to be able to break it. If you need pics of what I'm refering to let me know and I'll take a few tonight. but really its extreemly easy to see it when you do it. lemmie kno.

yea i think i know what your saying... isnt it basically the same thing for like all the interior lights haha ill try it out when i get the LEDs i think it should arrive sometime this week hopefully before my grad party on friday so i can show it off:thmsup:

by the way.... thank you all so much

Ok, here's the pics of my LEDs. My only camera is a point and shoot, I don't have a tripod, and I'm not even an amateur photographer, so the pics aren't that great.

Front seats and back seats, blue dome. Brightness in pic is pretty accurate but color is washed out, it is more blue.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062622.jpg

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062621.jpg

Front seats, white maps. Again, brightness is pretty accurate. Color is a little washed out but is pretty close, in person it's a bit whiter.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062623.jpg

Visor vanity mirrors, 5k white. Brightness and color are accurate.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062631.jpg

Glove box, white. Brightness and color are pretty accurate. You can see the OEM interior illumination too.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062625.jpg

Trunk, white. Brightness and color are pretty accurate.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062629.jpg

License plate, white. Probably most accurate brightness and color of all the pics.

http://i16.photobucket.com/albums/b41/jkesgomol/Accord/P6062630.jpg

Whoa! Nice.

But I hope that sub is wired out of phase or it's not doing much other than cancel out with the rest of the bass from your mid-bass drivers in tha cab because of it's mount orientation.

This link doesn't work. I'm really interested in these.


Great link! unforunately I dont see the vanity bulbs listed..



You need two of these for each visor right??



Here's the link for the 5k white I have, but it's currently sold out.
http://www.v-leds.com/Interior-LED/Vanity-LED/HI-POWER-SMT-3-LED-HID-p7114848.html

And here's regular white and blue.
http://www.v-leds.com/Interior-LED/Vanity-LED/HI-POWER-SMT-3-LED-HID-p4481128.html
http://www.v-leds.com/Interior-LED/Vanity-LED/HIGH-POWER-SMT-3-LED-p4481139.html


Yes, you need two per visor.

If I'm looking to replace my map lights (the 2 in roof console) and the dome light (roof light between front and rear seats) as well as trunk and license plate lights with white LEDs, is this all I will need?

1. http://www.v-leds.com/Exterior-LED/CornerSide-Marker-LED/White-LED/2-HID-WHITE-HIGH-POWER-p4481133-1-2.html (2 lights, one for license plate and one for trunk, or is the trunk needing more than 1 bulb?)
2. http://www.v-leds.com/Interior-LED/DomeMap-LED/White-LED/HID-WHITE-M-SMT-16-LED-p5767433-1-2.html (3 of these?)

Also how are V-LED's lights different from XenonDepot's Putco lights which are much more expensive and nearly $20 shipping to my location.

anyone able to chime in on this?

anyone able to chime in on this?

did you bother to read the thread? Do me a favor and read the thread from the beginning and you will find what you are looking for.

did you bother to read the thread? Do me a favor and read the thread from the beginning and you will find what you are looking for.

"Also how are V-LED's lights different from XenonDepot's Putco lights which are much more expensive and nearly $20 shipping to my location?"

I'm looking for comments on this question. And yes I did read the thread and just wanted to make sure I'm getting the right parts before I place an order.

Case of the Mondays for you?

where could i get the LED lights for the under-dash, or do yo guys all just buy that straight from honda?