angelbar86
08-09-2009, 11:17 PM
Is there an easy/ cheap way to install fog lights on the base model?? The one with no cut-outs ??
|
View Full Version : Easy way to install fog lights on basic model? angelbar86 08-09-2009, 11:17 PM Is there an easy/ cheap way to install fog lights on the base model?? The one with no cut-outs ?? ksills 08-10-2009, 03:36 AM Is there an easy/ cheap way to install fog lights on the base model?? The one with no cut-outs ?? No. None that are any good that are cheap without cutting. Without cutting, for good you would need a V-6 bumper, however, that's not cheap. angelbar86 08-17-2009, 11:21 PM figured that would be the best solution. thanks kw_da 08-18-2009, 09:12 AM Is there an easy/ cheap way to install fog lights on the base model?? The one with no cut-outs ?? Was thinking about this for some time. How about cutting one of the cross peices in the lower grill out and putting Hella Micro DE foglights attached to the underside of the bumper? It looks doable - there is metal for mounting and I believe enough space. It would be fairly well hidden. The only problem I can see is that the lights are a bit close to the centerline of the car. Like so: 24282 What do people think? majick47 08-18-2009, 04:47 PM kw-da I was thinking about doing the same thing, mounting some Hella real/yellow fog lights in the same location. I don't think they will be all that close to the midline. I had the Hellas mounted about the same distance apart on another car years ago and they worked very well. kw_da 08-18-2009, 11:23 PM kw-da I was thinking about doing the same thing, mounting some Hella real/yellow fog lights in the same location. I don't think they will be all that close to the midline. I had the Hellas mounted about the same distance apart on another car years ago and they worked very well. I figure for the Lx & LX-P, the oem fogs require a cutout - also the Trendgear foglights on ebay appear to require a cutout too. I'm not sure if I like that plastic housing that's required - this seems to be less intrusive. Did you have Hella foglights mounted before? The beam spread was ok? The Hella Micro DEs appear to run about $130. Not sure if I like the switch supplied with the kit - may use an Ebay circular one that others appear to use in their approach. David morcheez 08-19-2009, 08:50 PM that sux they didnt give the sedan the cut outs AutoParts 08-19-2009, 09:54 PM Is there an easy/ cheap way to install fog lights on the base model?? The one with no cut-outs ?? what color is your ride i got v6 bumper Royal Blue Pearl brand new for local pick up if u want angelbar86 08-19-2009, 10:41 PM i got a pmm |