Aiite since the last meet took about 3 months for it to happen i might as well start this thread now so we can finish off a meet before the new years. What you guys think? Last one worked out pretty good, meet some good people, good cars, good fun, no big problems = Good times.

Please update the list yourselves.
WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS

you can count me in for sure.

only prob was whne the cop came to tell me to lower my radio , he was cool though

you should try at leg lake park or whittier narrows or w.e. its called in el monte/rosemead they have like 10 parking lots and most are empty and its right off the 60 fwy

go take some pictures so we get an idea

go take some pictures so we get an idea
alright then i will
i'll post them up later today

i know that park they have both side right? and super quiet there
I'ts on South Rosemead

i know that park they have both side right? and super quiet there
I'ts on South Rosemead
yea thats the one im talking about..
lots of shade and place to hang out like 10 ft from your car and tons of parking.

WHAT: SoCal End of Summer DA Meet

WHEN: in 2-3 months

Start Time: around 3-4pm till whenever last time i stayed till 11pm

LOCATION: Undecided

Then we'll go somewhere to eat.

GOING LIST:

1. Bruceleroy
2. JcRox

im in too

I'll stay this time

WHAT: SoCal End of Summer DA Meet

WHEN: in 2-3 months

Start Time: around 3-4pm till whenever last time i stayed till 11pm

LOCATION: Undecided

Then we'll go somewhere to eat.

GOING LIST:

1. Bruceleroy
2. JcRox
3. 421

WHAT: SoCal End of Summer DA Meet
WHEN: in 2-3 months
Start Time: around 3-4pm till whenever last time i stayed till 11pm
LOCATION: Undecided

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati


I don't know about you guys but my summer ends next week.

WHAT: SoCal End of Summer DA Meet
WHEN: in 2-3 months
Start Time: around 3-4pm till whenever last time i stayed till 11pm
LOCATION: Undecided

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati


I don't know about you guys but my summer ends next week.
So does mine lol

I just learned that Whittier narrows charges $4 for parking on the weeknds

So does mine lol

I just learned that Whittier narrows charges $4 for parking on the weeknds

yea thats a negative then, should be plenty of other places thats free. how did you guys like the last place?

yea thats a negative then, should be plenty of other places thats free. how did you guys like the last place?
it was pretty cool , wish we woulda got that parking lot though

From what I saw, it looked okay to me.

WHAT: SoCal End of Summer DA Meet
WHEN: in 2-3 months
Start Time: around 3-4pm till whenever last time i stayed till 11pm
LOCATION: Undecided

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247

damn francis u a soldier

You know it.... Plus I want to see you exhaust.. :tongue:

hahha i guess pictures are not enough to convince you, o that means i gotta order my cargo net also :)

Yuo, plus the meet won't be fun without me...:nuts:

Chris better be lowered, giving him a deadline right now

Chris better be lowered, giving him a deadline right now

:lmao:

WHAT: SoCal End of Summer DA Meet
WHEN: in 2-3 months
Start Time: around 3-4pm till whenever last time i stayed till 11pm
LOCATION: Undecided

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88

yea foo im calling you out

I'm in! :thmsup:

Gotta get my wide angle lens before the meet.

WHAT: SoCal End of Summer DA Meet
WHEN: in 2-3 months
Start Time: around 3-4pm till whenever last time i stayed till 11pm
LOCATION: Undecided

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364

Location from the last meet was good IMO.

aiite guys so lets set it for that spot until we find a better place

WHAT: SoCal End of Summer DA Meet
WHEN: in 2-3 months
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364

aiite guys so lets set it for that spot until we find a better place

WHAT: SoCal End of Summer DA Meet
WHEN: in 2-3 months
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
sounds good to me

sigh i hope i don't look like a n00b there..
bruceleroy-if i do.its ur fault [:

WHAT: SoCal End of Summer DA Meet
WHEN: in 2-3 months
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89

2-3 months = fall season for everyone, no?

prolly, im gonna say last week of October how does that sound?

prolly, im gonna say last week of October how does that sound?
sounds good to me

damn guys can we do something a little closer to me such as Irvine?? If I find some parks with some bbq's and shade and a great place to take pics can we move it to Irvine pweez :D I just ask cuz I started school and with work I don't think i can make it to any of the meets in 626 area anymore.

WHAT: SoCal End of Summer DA Meet
WHEN: in 2-3 months
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

I'm in :D

damn guys can we do something a little closer to me such as Irvine?? If I find some parks with some bbq's and shade and a great place to take pics can we move it to Irvine pweez :D I just ask cuz I started school and with work I don't think i can make it to any of the meets in 626 area anymore.

i think irvine is a longer drive for most of the people on the list

That adds like another hour to my drive.

That adds like another hour to my drive.
you know you'd still go.

you know you'd still go.

You know it..... lol

You know it..... lol
sweet
cant wait to see what mods you do that day

my cargo net :)

im just gonna suggest october 24th thats the second to the last week of october. Didnt want the last last week cuz that lands on halloween peeps prolly needs to hang with friends/family. Updated the info

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

im just gonna suggest october 24th thats the second to the last week of october. Didnt want the last last week cuz that lands on halloween peeps prolly needs to hang with friends/family. Updated the info

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

aww, you already know it's my b-day weekend :thmsup: :wave:

im just gonna suggest october 24th thats the second to the last week of october. Didnt want the last last week cuz that lands on halloween peeps prolly needs to hang with friends/family. Updated the info

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn
sounds good to me

aiite start spreading the word, cuz everybody knows that the bird is the word

It's gonna be my first time coming out for the meets. I haven't been coming since I didn't have many mods. At least I got wheels now. Hopefully it will be lowered by the time the meet happens.:thmsup:

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

MAYBE LIST:
1. CaMole

aiite start spreading the word, cuz everybody knows that the bird is the word
Good song
funny fam guy ep

Nice. Maybe I'll be able to make it to this one. How was the turnout for the last meet? From what I saw it looked like half of the people on the definite list showed up.

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

MAYBE LIST:
1. CaMole
2. Drowzee

Nice. Maybe I'll be able to make it to this one. How was the turnout for the last meet? From what I saw it looked like half of the people on the definite list showed up.

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

MAYBE LIST:
1. CaMole
2. Drowzee
turnout was good
atleast 20 people there

doesnt matter how many people show up its always fun to just kick it

That's true

Last meet was fun, depending on what day and time it is, ill be able to go, weekends shouldn't be a prob, still going down for maybe ;)

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv

bump

I will have my Tein's by then! Wohoo!:banana: Sylv remember me? Been seeing you on the forums alot more lately. Nice ride :thmsup: Finally got them coilovers.

awesome cant wait to see the teins maybe ill get them by then also

awesome cant wait to see the teins maybe ill get them by then also

And your gold work vs-xx wheels right?? :naughty:

And your gold work vs-xx wheels right?? :naughty:

wheels will be the last thing i get since i already have wheels now, gotta get suspension and kit first

but yes those are in my scope

meet tomorrow in west covina,ca
right behind edwards west co 18 off the 10 frwy on vincent. meet will be held infront of store 13. all cars welcome

And your gold work vs-xx wheels right?? :naughty:

Chris, hows the lowering project going?

^ haha yea dude deadline coming up

^ haha yea dude deadline coming up

Yeah doode. If you need help I can install the springs for you. I already did a Civic SI. :naughty:

Chris, hows the lowering project going?

I'm going to have to go with coilovers to get the look I need, it's coming soon I'm still researching and saving :yes:

I MISSED IT, i was busy buying my car, when is the next one! if somebody knows, throw me a PM with Place, Time, And date!

edit: put me down as a maybe for the Oct end of summer meet.

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS

bump its coming sooner then you think guys

Wheres everyone at? That list is short.

if i had my license i would come >_>

bump its coming sooner then you think guys

yup, 40 days away will creep up on everybody pretty darn fast.

Let's get some more people on that list!

i should order my cargo net soon, u still down francis?

people need to put the meet in there sigs again, spread the word

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS

no accord, no roll

I'm in as well!! :thmsup:

no accord, no roll

Thought you were getiing an 8th Gen?

Thought you were getiing an 8th Gen?

I would rather get e39 m5, but for some reason this morning I've been thinking of a 2005 volvo v70R 6speed

I would rather get e39 m5, but for some reason this morning I've been thinking of a 2005 volvo v70R 6speed

:paranoid:

We had a v70r at my work, it shot flames when it boosted cold before the idle dropped. Same with the s60r. Volvo's are very nice cars IMO.

yo im in
WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn
10. anacondatp

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS

cant wait

I hope to make it if I am in town. But chances are I will be gone as usual. Every stinkin' time I tell ya!!!

just leave ur car parked there haha

common chris you do it yet? its coming up

http://www.ray-lee.com/Stuff/Honda%20Accord/chris_slammed.jpg

Does anyone know a good PDR? I may need one...

u need drugs doggie?

Drugs? Nah... Paintless Dent Repair.

o thought you were looking for a Physician

common chris you do it yet? its coming up

http://www.ray-lee.com/Stuff/Honda%20Accord/chris_slammed.jpg

Ahh I know man it'll happen, there's still time I'll probably go with throwdown's deal. All I ask is that I get ALOT of nice hdr shots next meet :naughty:

^^ will do

I got a killer dent guy. We use him at work for our ad cars, super cool guy. I will get the number for ya tomorrow. He is a long beach/ signal hill area guy.

I got a killer dent guy. We use him at work for our ad cars, super cool guy. I will get the number for ya tomorrow. He is a long beach/ signal hill area guy.

If you can shoot me PM with his e-mail or something, that'd be great. I wanna send him a pic and see if it's fixable and a quote.

I am going to work a bit later today, so I will pm ya all the info this evening.

e39 M5 is a nice choice, but remember that maintenance is going to cost you some $$. My friend sold his '00 Civic EX and got an e39 540i 6spd Blk/Blk 180k mi, hes loving it haha

yo im in
WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn
10. anacondatp

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS

Pretty short list so far compared to the summer meet list, anyone else? It's coming up.

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. 421
4. Kiribati
5. Honda247
6. Chris_88
7. woody4364
8. joho89
9. CDsDontBurn
10. LoveMyInspire

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS

I'll roll if you guys let me =P and I get a car....

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. Kiribati
4. Honda247
5. Chris_88
6. woody4364
7. joho89
8. CDsDontBurn
9. LoveMyInspire

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS
5. 421

sure if you like, what car u picking up?

still haven't decided yet

you should get an rx8. 1.3L engine 232HP (~205Whp) naturally aspirated. not very fuel efficient though, lol.

Damn rotorhead.......My vote is the mazdaspeed3. Spanked the rwd genesis coupe in the latest Motortrend. The MZR motor is very nice, and there is a ton of bolt on's. I personally liked the last gen body style over the latest. BTW Seven Stock is this weekend at Mazda headquarters in Irvine. HUGE rotary RX-7 meet/show if you guys are bored.....http://www.sevenstock.org/

haha, will you guys get mad if i bring my corolla instead of my accord :)?

haha, will you guys get mad if i bring my corolla instead of my accord :)?

is it an 86 corolla?

is it an 86 corolla?

Was just about to ask that. AE86s definitely deserve some props.

-GT

is it an 86 corolla?
Haha nice

Damn rotorhead.......

what? i still love 'em!

My hommie at work is dropping in my 88 RX7 turbo 2 motor and tranny in his AE86. I was making around 320 rwhp @ 10lbs of boost (that came in around 1200 rpm and I had 10lbs at 1800 rpm to 8k) and could easily bury the needle at 170 mph. He will be close to 800 lbs lighter, the car should be a hand full to drive. My bet is he will be turning down the boost so it will be drivable hehe.

:drool:

and he could keep the 10psi, he'd just need to feather the throttle a little bit until he gets used to it! :p

Hey Ray, did you get your cargo net yet......?

Hey Ray, did you get your cargo net yet......?

yea i still need to order it, i still have time

Got my Iphone adapter installed :thmsup:

Got my Iphone adapter installed :thmsup:
how much was it?
easy install?

The kit was $140. It was installed through the glove box. I had my audio guy install it. Only took an hour or so. All the factory controls are in tact. And the text shows up on the screen as well.

The kit was $140. It was installed through the glove box. I had my audio guy install it. Only took an hour or so. All the factory controls are in tact. And the text shows up on the screen as well.

sweet u gotta show me next time

same here

I have a cargo net I don't plan to install... it's been sliding around in it's OEM bag in my trunk since Day 1 of buying my car.

I have a cargo net I don't plan to install... it's been sliding around in it's OEM bag in my trunk since Day 1 of buying my car.

I'll install it for you... :yes:

Sounds good! I'm just afraid I can't throw my car cover into my trunk without getting it caught on the cargo net :paranoid:

I'll install it for you... :yes:

that reminds me, i got fog lights, a spoiler, my license plate, tints, hids, retrofitting and other mods :naughty:

haha jk :banana:
but i do need to buy some :(

bump


WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. Kiribati
4. Honda247
5. Chris_88
6. woody4364
7. joho89
8. CDsDontBurn
9. LoveMyInspire

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS
5. 421

ill try to make it!

so thats a maybe

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. Kiribati
4. Honda247
5. Chris_88
6. woody4364
7. joho89
8. CDsDontBurn
9. LoveMyInspire

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS
5. 421
6. Necromotic

Paintless Dent Repair.
Dent masters of CA.......John Cole Cell # 213 703-2792
We can get a better deal if we get a few guys (4) that need their cars gone over at the upcoming meet. He will come meet us and go to town on the dings and dents. Sorry for the lagging, I just talked to him today. Let start a list of people that want the PDR service.

01) 09^cbp^6mt.......2 dings

I have rock chips in my paint. Can he take care of that? :P

But there is ONE ding (so small) that I want to take care of. I don't know if I
want to pay for it to get fixed though. It's so small that it's almost not there.

I have rock chips in my paint. Can he take care of that? :P

But there is ONE ding (so small) that I want to take care of. I don't know if I
want to pay for it to get fixed though. It's so small that it's almost not there.

if its not there then why would you need it? :lmao:

Almost not there. :thmsup:

Dent masters of CA.......John Cole Cell # 213 703-2792
We can get a better deal if we get a few guys (4) that need their cars gone over at the upcoming meet. He will come meet us and go to town on the dings and dents. Sorry for the lagging, I just talked to him today. Let start a list of people that want the PDR service.

01) 09^cbp^6mt.......2 dings
I have a dent under my passenger door under the side skirt panel
could he fix it?

Chances are yes. But he has to see it and get into the car to see if it is fixable.

I have rock chips in my paint. Can he take care of that? :P

But there is ONE ding (so small) that I want to take care of. I don't know if I
want to pay for it to get fixed though. It's so small that it's almost not there.

What color is the car. I got a few touch up kits I have been collecting.

Taffy white.

What's the price range on the guy that you invited to come check out the dings and dents?
The ding I have can't be bigger than a quarter. Barely noticeable...That's why I'm not sure
if I want to pay to get something so insignificant fixed. Stingy? Maybe...

Yeah I might see how much it cost to fix mine as well. Mine is probably the size of a quarter also, but my paint is chipped and the dent is on my fender wheel crease, so I don't know what to expect.

If we can get 4 cars, it will be 65 a dent or 120 for the whole car and he will come to us at the next meet. I will grab some TW touch up tomorrow when I grab my check.

im in for sure
hopefuly more people do it so the price drops

The guy is TOP NOTCH BTW. I have seen him work some serious magic with the alloy bodied Jaguars at work. If anyone does call him let him know you got the number from Steve at LA Prep,no promises but chances are he will give you a better price that just off the street.

If we can get 4 cars, it will be 65 a dent or 120 for the whole car and he will come to us at the next meet. I will grab some TW touch up tomorrow when I grab my check.

Do you have any pmm touch up paint? I have like 1 or 2 rock chips also :D

yup, on my kitchen counter right now next to my CBP paint.

Good lookin out. :thmsup:

$65 w/ 4 cars is high for me. Count me out. My ding is no big deal.
Not a $65 deal, at least. I'll leave it. :D

No problem. If i didnt have 3 or 4 I wouldn't bother yet either.

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. Kiribati
4. Honda247
5. Chris_88
6. woody4364
7. joho89
8. CDsDontBurn
9. LoveMyInspire

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS
5. 421
6. Necromotic
7. indubitably

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. Kiribati
4. Honda247
5. Chris_88
6. woody4364
7. joho89
8. CDsDontBurn
9. LoveMyInspire

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS
5. 421
6. Necromotic
7. indubitably

the maybe list is catching up to the for sure list

WHAT: SoCal End of Summer DA Meet
WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. Kiribati
4. Honda247
5. Chris_88
6. woody4364
7. joho89
8. CDsDontBurn
9. LoveMyInspire
10. 09^cbp^6mt

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS
5. 421
6. Necromotic
7. indubitably

After a long wait my tein ss finally came :banana:

Can anyone suggest a good/cheap/reputable place for install?

just wondering, what will we be eating :)?

just wondering, what will we be eating :)?

Probably whatever is nearby, we went to in n out the last meet. Are you on the going list now?

After a long wait my tein ss finally came :banana:

Can anyone suggest a good/cheap/reputable place for install?

Bring it here to Fresno, I'll do it for FREE......

After a long wait my tein ss finally came :banana:

Can anyone suggest a good/cheap/reputable place for install?

you can hit up the place that did my springs, they did a good job and pretty cheap

Probably whatever is nearby, we went to in n out the last meet. Are you on the going list now?
that was fun.
mini photshoot after.lol

Ask Mystick6. He told me a good place and it was $85 I think. I haven't been there since I'm doing it myself but PM him. He's from LA area too.

Hello LA, used to live and work in Westwood area, often miss Santa Monica and Huntington and Redondo Beach. All meets in LA are fun, enjoy wising all well down there, hope all those fires are over soon. My brother was burned out up in Santa Barbara. Tein SS look great, if I still lived down there would install for free. Regards

Richard

off topic but does anyone know how to install rotors?
i've seen the diy threads but im not too sure that i can.
by the way is $98 for a pair of cross drilled & slotted rotors a good deal?

install it yet Chris?

buzzkill....
i have some kind of leaders retreat on the 23-25th....
sigh
i was really looking forward to this too >___<
maybe this is a sign that i should get my drop before meeting other da'ers ahha

put me on maybe ray i'll try to drop by depending on what time i'm done.
nice new pic btw

install it yet Chris?

Nah man not yet. It will most likely be this weekend because I still have to bring my car to the dealer this week to fix an annoying humming sound I have. Once that is fixed, they'll be installed asap. btw nice pic, those are the kind of shots I need when I get my coils on :D

Bring it here to Fresno, I'll do it for FREE......

Thanks for the offer man but it's a little too far for my liking. I think you'll have to wait for the meet to see them installed :D

WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. Kiribati
4. Honda247
5. Chris_88
6. woody4364
7. joho89
8. CDsDontBurn
9. LoveMyInspire
10. 09^cbp^6mt

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS
5. 421
6. Necromotic
7. indubitably
8. joho89

Grats on new coilovers! Installing them is easy, just takes some time -- Rotors are the same. If you got 2 rotors for $100, thats sounds pretty good. Honda charged me more than that for the front rotors. Where did you get them?

Grats on new coilovers! Installing them is easy, just takes some time -- Rotors are the same. If you got 2 rotors for $100, thats sounds pretty good. Honda charged me more than that for the front rotors. Where did you get them?
why did they need to be replaced?

i got them from 88 rotors.
website is 88rotors.com

they main warehouse is like a block from my house , man they got a ton of crap there

off topic but does anyone know how to install rotors?
i've seen the diy threads but im not too sure that i can.
by the way is $98 for a pair of cross drilled & slotted rotors a good deal?

if you're doin it at your place in el monte and you have tools I'm down to lend a hand

off topic but does anyone know how to install rotors?
i've seen the diy threads but im not too sure that i can.
by the way is $98 for a pair of cross drilled & slotted rotors a good deal?

idk how different it is for 6th gen vs. 8th gen mounting/locking positions for the front rotors. but, on my 6th gen, all that holds the front rotors in place is two screws. take off the wheel, take off the caliper held in by two bolts, then you have full access to the rotor. you will see two phillips head screws, unscrew them and the rotor comes right off. you might need to use the butt end of a screw driver or a rubber mallet from behind the rotor to get it out if necessary (like if it's suck on due to road grime or w/e other crap get stuck there) and it'll come right out.

the rear rotors i don't quite remember how they came out on my 6th gen, but i do remember it was still quite easy to pull out.

again, i don't know if it's any different in an 8th gen, but that's how it is on the 6th gen.

if you're doin it at your place in el monte and you have tools I'm down to lend a hand
thanks. i just need to get the tools then



idk how different it is for 6th gen vs. 8th gen mounting/locking positions for the front rotors. but, on my 6th gen, all that holds the front rotors in place is two screws. take off the wheel, take off the caliper held in by two bolts, then you have full access to the rotor. you will see two phillips head screws, unscrew them and the rotor comes right off. you might need to use the butt end of a screw driver or a rubber mallet from behind the rotor to get it out if necessary (like if it's suck on due to road grime or w/e other crap get stuck there) and it'll come right out.

the rear rotors i don't quite remember how they came out on my 6th gen, but i do remember it was still quite easy to pull out.

again, i don't know if it's any different in an 8th gen, but that's how it is on the 6th gen.


thanks for the info
cant wait til i get it done

just got my cargo net, just need ur help francis :)

just got my cargo net, just need ur help francis :)

Sweet. Can't wait to install it....... :thmsup:

thanks. i just need to get the tools then
thanks for the info
cant wait til i get it done

Depending on where you live, my friend and I could probably help; We have done this sort of Job many times :)

I got all the tools you could need, just let me know.

Depending on where you live, my friend and I could probably help; We have done this sort of Job many times :)
wow thanks
I got all the tools you could need, just let me know.
thanks as well.

wow many peaople have experience with this , and are kind enough to lend a hand

maybe sometime this week

I got time off, just let me know. We could do it at my work in Signal hill if you want to drive out to the south bay.

wow many peaople have experience with this , and are kind enough to lend a hand

that's how we roll

Is anyone in the area willing to help me with coilover install? :paranoid:

Is anyone in the area willing to help me with coilover install? :paranoid:

Are you still looking for someone to help you install the Tiens?
If so, I got a shop that can help you out with that...

Are you still looking for someone to help you install the Tiens?
If so, I got a shop that can help you out with that...

Well I'll likely be putting them on this weekend because I'm pretty busy during the week. As of right now I am just looking at the different possibilities. Let me know your shop details.

Well I'll likely be putting them on this weekend because I'm pretty busy during the week. As of right now I am just looking at the different possibilities. Let me know your shop details.

I will PM you the details...

If you guys want, I can install Brakes/Coilovers/RSB/HIDs/Custom Interior LEDs. All the mods on my car are done by my friend and I.

PM Me if you need help with anything! We can figure something out

Jc, if you want to do your brakes on the weekend; I can come help. Have tools to do it too.
Chris, you too :D

If you guys want, I can install Brakes/Coilovers/RSB/HIDs/Custom Interior LEDs. All the mods on my car are done by my friend and I.

PM Me if you need help with anything! We can figure something out

Jc, if you want to do your brakes on the weekend; I can come help. Have tools to do it too.
Chris, you too :D
Ok thanks

that's how we roll
yea i noticed.lol
forum love..haha

anyone wanna help me put my front license plate on :)?

why? IMO, driving w/o a front plate is u883|2 1337.

for the most part, cops here in so cali don't care if you don't have a front plate on or not unless the cop is being a douche or get stopped at a check point.

anyone wanna help me put my front license plate on :)?

sure, call me if your close to the southbay / Gardena / Carson. 310-756-5481:thumbsup:

why? IMO, driving w/o a front plate is u883|2 1337.

for the most part, cops here in so cali don't care if you don't have a front plate on or not unless the cop is being a douche or get stopped at a check point.

For real. All the BMWs I see around here drive w/o fronts so why not my coupe?

just got my cargo net, just need ur help francis :)
yeaa buddy, me too! :wave:

double post, my bad.

For real. All the BMWs I see around here drive w/o fronts so why not my coupe?

when i had my rx8 i was driving around w/o my front plate the entire time i owned it. then, there were a few cops on motorcycles doing some sneaky speed checking out in pomona. they didn't get me for speeding cuz i wasn't. instead they gave me a fix-it ticket for not having my front plate. i had the front plate in my car's trunk since the day i got it, and i also had a few zip ties with me since i had finished working on a client's computer with me. i asked the cop if i could just tie it down to the front of my car (california law says it must be on the front of the car securely tied down....it doesn't say how it must be tied down ;) ), and he said no and wrote me a fix-it ticket.

needless to say, i got out of that fix-it ticket because roughly 14hrs. later, i totaled my car :(. that was a bad day :(:wavebye:

I've been pulled over once for not having it on; I explained that I just came from a photoshoot and will be planning to put it back on as soon as I get home -- Which was less than a mile away haha. If you have a camera with you, just have a few nice pics of the car and show it to him, MAKE SURE YOUR CAR IS CLEAN OR THIS WILL NOT WORK!
Our cars are photogenic, they will understand

(I didn't lie to the cop, I was actually doing a photoshoot with my buddies old 97 Mustang GT, which is on this forum)


Edit:
Okay, There are 2 people that want to install coilovers, and 1 Installing Brake Rotors.

Do we all want to do this at the same time? -- We should all figure out a good date/time for all of us. Maybe do a small photoshoot right after? :D

i think i might take off my front plate. i find it to be a bit of an eye sore. but, idk if there will be any holes going through the bumper or not. wouldn't be surprised if there are some. would removing the front plate require me to remove the bumper as well?

Not at all, there are 2 bolts under the mount that holds the license plate, undo those and it should come off, if it does not, then you need to remove the license plate to remove the screw that is screwed in your bumper.

that applies to the 6th gen? remember, i have a 6th gen accord :p.

There is one bolt holding the bottom bracket. The bottom bracket looks like a Y. You will have two hole in the bumper. You may even have a flat spot on your bumper where the plate goes.

http://i463.photobucket.com/albums/qq359/Honda247_2008/DSC01897.jpg
This is a 1998.

O ya, sorry >.< So used to all the 8th Gens on the forum haha, but its a similar process :)


Just find where the license plate holder is connected to, simple as pie :D

I've been pulled over once for not having it on; I explained that I just came from a photoshoot and will be planning to put it back on as soon as I get home -- Which was less than a mile away haha. If you have a camera with you, just have a few nice pics of the car and show it to him, MAKE SURE YOUR CAR IS CLEAN OR THIS WILL NOT WORK!
Our cars are photogenic, they will understand

(I didn't lie to the cop, I was actually doing a photoshoot with my buddies old 97 Mustang GT, which is on this forum)


Edit:
Okay, There are 2 people that want to install coilovers, and 1 Installing Brake Rotors.

Do we all want to do this at the same time? -- We should all figure out a good date/time for all of us. Maybe do a small photoshoot right after? :D
that sounds like a good idea.
im so down just let me know when

and you gotta help me do those interior lights you put in , they set off the interior pretty good.

Sounds good who's the other guy who needs coilovers installed?

CaMole.

What days are good for you guys? I'm free saturday.

What days are good for you guys? I'm free saturday.
I'm good for saturday as well.

i wish there were a meet closer in the sgv area preferably alhambra or rosemead :), the less ghetto the better.

yeah you can count me for the meet :] just let me know the place and time porfavor

yeah you can count me for the meet :] just let me know the place and time porfavor

WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

-----------------

I'll see when my friend is free, I think Saturday is good for him, but ill confirm :yes:

Well I got screwed by work again. I won't be able to make it, I will be in Alaska till the 26th. I got PMM and TW touch up paint if anyone one wants drop by and pick them up from me, for the guys that need it.

time for some ice road truckin?

There is one bolt holding the bottom bracket. The bottom bracket looks like a Y. You will have two hole in the bumper. You may even have a flat spot on your bumper where the plate goes.

http://i463.photobucket.com/albums/qq359/Honda247_2008/DSC01897.jpg
This is a 1998.

i still can't get over that 6th gen wanting to look like an 8th gen :lol:. it does however give me an idea of what the front is going to look like. hopefully my 2000 model won't have that ugly looking flat spot. if it does, ill just stick to having the front plate on =\

O ya, sorry >.< So used to all the 8th Gens on the forum haha, but its a similar process :)


Just find where the license plate holder is connected to, simple as pie :D

lol, i hope so!

i wish there were a meet closer in the sgv area preferably alhambra or rosemead :), the less ghetto the better.

:lmao::lmao::lmao::lmao::lmao:

since there's an address, why not google map it with satellite to check out the area? it'll give you a rough idea of what the area looks like

...:paranoid:

time for some ice road truckin?

Nope, not me I fly, co-worker, yes. :dunno:
I fly out to most of the jobs, the company I work for has a co-worker with a CDL take the cars for us.

i wish there were a meet closer in the sgv area preferably alhambra or rosemead :), the less ghetto the better.

We can always get a 626 meet together. I've been "trying" (not really) to organize one
but haven't gotten really anyone actually LIVING in the 626 interested or even reading
on whatever small meet there might be. I only know two or three of us DA members that
live in the 626.

I live in Temple City so a drive to anywhere in the 626 is no inconvenience. But that's another
issue that we can deal with in the separate 626 thread.

Well I got screwed by work again. I won't be able to make it, I will be in Alaska till the 26th. I got PMM and TW touch up paint if anyone one wants drop by and pick them up from me, for the guys that need it.I never got your name, but thanks again for picking up some TW touchup. Shame your work had
to get in the way of your weekend and the meetup. There's always going to be another meetup,
we can deal with the touchup paint then. :banana:

When we set these meets up, we always ask for suggestions as far as locations. No one suggested anything so were going with the same one we used last time. The park is not "ghetto" It's in a nice quiet residential area. And as far as driving distance, Honda247(Francis) comes all the way from Fresno. So none of us from socal should have a problem driving an hour or so to a meet.

WHEN: October 24th
TIME: around 3-4pm
LOCATION: Gloria Heer Park
18109 Gallineta St Rowland Heights, CA 91748

Then we'll go somewhere to eat.

GOING LIST:
1. Bruceleroy
2. JcRox
3. Kiribati
4. Honda247
5. Chris_88
6. woody4364
7. joho89
8. CDsDontBurn
9. LoveMyInspire
10. 09^cbp^6mt

MAYBE LIST:
1. CaMole
2. Drowzee
3. Sylv
4. DANGEROUS
5. 421
6. Necromotic
7. indubitably
8. joho89
9. subx0va


sigh if only i did more with my car instead of hids, debadge, and tint :\

We can always get a 626 meet together. I've been "trying" (not really) to organize one
but haven't gotten really anyone actually LIVING in the 626 interested or even reading
on whatever small meet there might be. I only know two or three of us DA members that
live in the 626.
yea it would be nice to have a local 626 meet every week or bi-weekly

When we set these meets up, we always ask for suggestions as far as locations. No one suggested anything so were going with the same one we used last time. The park is not "ghetto" It's in a nice quiet residential area. And as far as driving distance, Honda247(Francis) comes all the way from Fresno. So none of us from socal should have a problem driving an hour or so to a meet.
yea the park was in a nice area. i wish we would've been able to go in the parking lot , damn bbq.
yea francis is too down.

What's wrong with the mall parking lot where we had the meet in february? Isn't it nearby? I just get paranoid of curbs :paranoid:

haha kiribati 626 meet sounds good too :]

sorry guys, i didnt mean to call THIS location ghetto, i was just simply stating we should have a meet in the 626 area thats not ghetto, another time. haha. my bad.

What's wrong with the mall parking lot where we had the meet in february? Isn't it nearby? I just get paranoid of curbs :paranoid: The Puente Hills mall?

The Puente Hills mall?

Yea I thought that was a good place, alot of space and no curbs or parallel parking :D

That is very true but more of a chance of cop harassment there
I get paranoid when I see cops , they always find a way of giving me a ticket

That is very true but more of a chance of cop harassment there
I get paranoid when I see cops , they always find a way of giving me a ticket

lol if you're not doing anything wrong then why are you paranoid?

lol if you're not doing anything wrong then why are you paranoid?
Idk just.
But in All seriousness I seem to have bad luck with cops,usualy it's nothing big.

lol maybe it's cuz you're looking/acting all paranoid, they can smell that shit you know?

I'm faded around cops all the time and I don't give a shit, don't think they do either, never get hassled

Yea we got too much attention at puente hills mall from the cops. But we can have meets there too if you guys want.

We should just meet at the park and then go to the Mall for a photoshoot. I can't do any mods at the mall....:naughty:

lol maybe it's cuz you're looking/acting all paranoid, they can smell that shit you know?

I'm faded around cops all the time and I don't give a shit, don't think they do either, never get hassled
haha im always in that state , they never once got me for that but other shit.lol
but i act calm when i see them or have an encounter with them.

but when there is a lot of nice cars, like at a meet they tend to stick around and hassle people.
at the last meet a cop came and told me to lower my radio because it was too loud. he was cool about it but still. it wasnt even loud.

at this meet that's happening in a couple weeks, would it be cool if you guys helped me out with my end links for my car? :)

my front right is loose and i think my front left is starting to go out on me as well. since my car is lowered, should i get some aftermarket end links, or could i get some OEMs? if OEMs, could i get them from auto-zone or would it be recommended to get them from the dealer? how much should OEM end links go for?

at this meet that's happening in a couple weeks, would it be cool if you guys helped me out with my end links for my car? :)

my front right is loose and i think my front left is starting to go out on me as well. since my car is lowered, should i get some aftermarket end links, or could i get some OEMs? if OEMs, could i get them from auto-zone or would it be recommended to get them from the dealer? how much should OEM end links go for?

Look up Moog brand end links. They are sweet. I stripped mine on my 2003 and replaced them both with Moog. They are much beefier looking (and hopefully stronger) than stock. Just make sure to borrow a grease gun to lubricate them as the boots are not sealed. Or go to a mechanic and give him a few $ to grease them for you.

I don't know if saturday will be good for me. Going to be real busy on the Rims. What about Next saturday? (Or this sunday)

I will keep this thread updated on being able to do the helping out or not

I don't know if saturday will be good for me. Going to be real busy on the Rims. What about Next saturday? (Or this sunday)

I will keep this thread updated on being able to do the helping out or not

I'm just gonna get my coils installed at a local shop tomorrow. Don't you get alignments from a buddy's shop or something? Can you hook me up?

So how are your tires doing without camber kits?

I'm just gonna get my coils installed at a local shop tomorrow.

Don't you get alignments from a buddy's shop or something? Can you hook me up?

So how are your tires doing without camber kits?

Lol kk cool.

I do get alignments but he charges me ~$89 (He wont give me an alignment unless i get camber kits rofl, "Waste of Time/Money"

Tires seem to be doing just fine, before i went to get new ones, i checked the tread on the old 2, there was about maybe 1.5k Miles left on one side, while the other side had a bit of wire thread showing (Meaning its just about finished rofl)

When I get to do the front rims (paint black), I'll post how the tread is looking, those are the ones that will need to be changed next

Lol kk cool.

I do get alignments but he charges me ~$89 (He wont give me an alignment unless i get camber kits rofl, "Waste of Time/Money"

Tires seem to be doing just fine, before i went to get new ones, i checked the tread on the old 2, there was about maybe 1.5k Miles left on one side, while the other side had a bit of wire thread showing (Meaning its just about finished rofl)

When I get to do the front rims (paint black), I'll post how the tread is looking, those are the ones that will need to be changed next
i remembered when you lifted your car we noticed the wire..
i think im gonna wait on the rotors for the time being. i much rather paint my stocks bronze before i were to install them.

Chris, where are the pics?

Well I finally dropped my car today only like an inch for now until I get camber kits. The rear camber is really bad I need to get a camber kit and alignment asap. I plan on going ALOT lower when my kits come in which should be before the meet. Here are some phone pics

Looks much better. Are you gonna get some splash guards too? If you do I can install them for you at the meet.

Not bad. Where did you get them installed. Can you go alot lower?

i remembered when you lifted your car we noticed the wire..
i think im gonna wait on the rotors for the time being. i much rather paint my stocks bronze before i were to install them.

Ok good :banana:

My fingers and whole body are nearly numb and nonfunctional after doing so much sanding and painting... AND THEN sanding again because Black looks way too cheap. :yes: I think my fingers are smoother than a cylinder wall :lmao:

--What has been painted--
Calipers
Window Trim
2 Rims (next 2 2moro)
Both H Badges
Engine Top
Grill
Spacers
Rotor Lip
---
Start Time Today: 10:30am
Break Time So Far: 10:30pm
Tired? ... :yes:

Uploading Photos. Will show in Gallery

Looks much better. Are you gonna get some splash guards too? If you do I can install them for you at the meet.

That would be great man I just might. I'm guessing collegehillshonda is the best place to buy?

Not bad. Where did you get them installed. Can you go alot lower?

I got it done at promax, they got some pretty sick rides over there. I am only like 1/3 dropped so I still have around 2/3 thread left to drop

That would be great man I just might. I'm guessing collegehillshonda is the best place to buy?

$72.00 Not bad. I paid close to $100.00 for mine. But I went to my dealer.

$72.00 Not bad. I paid close to $100.00 for mine. But I went to my dealer.

They were $120 at my dealer screw that

Good job. Glad you went to Promax. That's the cheapest place I found so far that does good quality work, and pretty quick too.

$120? Get them from CHH. I'll install them for you....

Well I finally dropped my car today only like an inch for now until I get camber kits. The rear camber is really bad I need to get a camber kit and alignment asap. I plan on going ALOT lower when my kits come in which should be before the meet. Here are some phone pics

why is it so high??

Look up Moog brand end links. They are sweet. I stripped mine on my 2003 and replaced them both with Moog. They are much beefier looking (and hopefully stronger) than stock. Just make sure to borrow a grease gun to lubricate them as the boots are not sealed. Or go to a mechanic and give him a few $ to grease them for you.

any idea how much they go for? i can't really go on too many websites while here at work since most of websites are blocked off.

Any one else want thier exhust tips painted? I'll bring my paint.....

why is it so high??

Because I need camber kits mang once I get those I'll be lower lol your never satisfied. I already scraped the bottom left of my bumper gotta get used to driving this low.

Because I need camber kits mang once I get those I'll be lower lol your never satisfied. I already scraped the bottom left of my bumper gotta get used to driving this low.

LOL now you gotta drive slow on bumps and driveways. And you have to do the snake when going over speed bumps......

How easy is it to install led's in the interior? That might be my next mod? Maybe for the meet???? Can anyone help as far as where to get them?

CHH. I can install it for you at the meet....:thmsup:
Its not hard to install. Just some drilling and zip ties and your done....

My bad. I meant replacing the existing lighting.

Check the sponsor corner. Diode dynamics. Some get them from Vleds.com i think.

I'll check it out

Dont go Diode Dynamics. I did and I regret it. 3 blown LEDs and blew my driver side fuse in 2 weeks. Im going VLEDs now. A little more money but hopefully better.

I'll check it out

Let me know how much. I may want to do this as well. I'll help you install them at the meet....

Woody, here's my wife Civic EX
http://i463.photobucket.com/albums/qq359/Honda247_2008/Photo0130.jpg
http://i463.photobucket.com/albums/qq359/Honda247_2008/Photo0133.jpg
http://i463.photobucket.com/albums/qq359/Honda247_2008/Photo0131.jpg
http://i463.photobucket.com/albums/qq359/Honda247_2008/Photo0132.jpg
http://i463.photobucket.com/albums/qq359/Honda247_2008/Photo0129.jpg
No more slow a$$ Hybrid.....

Just got my coupe and I’m looking forward to going to my first meet. Keep me posted.

CHH. I can install it for you at the meet....:thmsup:
Its not hard to install. Just some drilling and zip ties and your done....
so you know how to do the led lighting that goes in the footwell,cup holder area?

Any one else want thier exhust tips painted? I'll bring my paint.....
i want mine painted since my painted one got stolen

so you know how to do the led lighting that goes in the footwell,cup holder area?

Just the foot well...


i want mine painted since my painted one got stolen

I'll bring my paint and i'll get some painters tape....

Just got my coupe and I’m looking forward to going to my first meet. Keep me posted.

Sweet. I'll see you there.....

Yea those wheels are horrible. Rather have the ones ur getting

hahha sweet hello kitty drag on ur wifes civic

I'll bring my paint and i'll get some painters tape....
Oh ok cool

Good job. Glad you went to Promax. That's the cheapest place I found so far that does good quality work, and pretty quick too.

my dad got 2 cars tinted there and it is ghetto

i hear terrible things about promax, and great things.. weird. but california tints does a great job and has a good rep around so cal.

i hear terrible things about promax, and great things.. weird. but california tints does a great job and has a good rep around so cal.
True but they are over priced

Why not just do Custom Interior LEDs... buddy got 50 leds for $5 shipped on ebay. I used about 18 of them lol no zip ties -- soldering resistors and wiring em up :D I'll show at the meet, much MUCH cheaper than w/e the others are selling theirs for (It's just for plug and play and such, but you can just create your own for much much cheaper! :))

--Thing is.. it takes more time and effort, but is a lot more worth it, can fit 3 bulbs in the dome light (I did 2)