05 power window switch replacement

[princess]

Remove the power window switch panel (A).

-1 Pry up on the rear edge of the switch panel with a trim tool to release the rear clip.
-2 Pull out along the edge of the panel to release the hooks (B) and front clip.
-3 Disconnect the power mirror switch connector (C) (driver's) and the power window switch connector (D).

Remove the screw from under the pull pocket cap (A).

[greg-ster]

A couple of items of note for future DIY'ers:

-For the trim tool, a nice size thin-tipped flat head screwdriver, wrapped in good masking tape works great.

-You don't need to remove the door panel

-A couple of clips on the left side of the switch can be a major pain to undo

-Removing the mirror switch can be a pain. It is seperate from the window switches

Thanks princess

[princess]

Great tips!! :thmsup: I'm not the one around here that's done it before. AND he always makes it all look easy! :D