I have a 2004 Accord V6 6spd manual. We have vibrations in from the drivetrain under acceleration. I have done some searching on various forums and found that the drive axles could be the reason for the vibrations. Since the car has 82K miles, I thought I would just buy some new ones and replace. When I took the driver side wheel off to begin, I noticed my front lower transmission mount didn't look correct, as if the two rubber pieces had broken apart. I have been unable to find a good picture of a new one online to verify that mine is broken, and none of the auto shops in my area have them, so I was hoping someone could help me out before I ordered one!
From this link:
http://www.hondapartsnow.com/body_air_conditioning/b__4702~2004~honda~accord~2dr_ex_v6_navi~6mt~kl~engine~mounts.html
I am referring to part 15.
Here are the pics of mine, I am referring to the two rubber pieces that are not attached (should they be?):
From this link:
http://www.hondapartsnow.com/body_air_conditioning/b__4702~2004~honda~accord~2dr_ex_v6_navi~6mt~kl~engine~mounts.html
I am referring to part 15.
Here are the pics of mine, I am referring to the two rubber pieces that are not attached (should they be?):