DIY oem switch on ebay foglight harness

[ga006959]

Ok, I see it now.

I am ganna get the OEM Switch so any chance you know how that refit the wire into the Switch?

My questions are do you need to buy "something" to fit the wire into the switch or just shove the wire in there and it will some what staying and not moving around?

Thanks so much I've been researching all night for this.

[THAiPHOON]

Haha, that's paperboy's area of expertise right there. You can also PM another member, californium90, he's also done this mod.

Hope that helps man! I just used my ebay fog switch, fits pretty snug.

[ga006959]

Originally Posted by THAiPHOON

Haha, that's paperboy's area of expertise right there. You can also PM another member, californium90, he's also done this mod.

Hope that helps man! I just used my ebay fog switch, fits pretty snug.

Btw what kind of fog light blub you use? looks really yellow.

I am still debating rather i should get yellow fog and 6000k projector headlight.
but i am not sure what kind of fog light blub would look good, plus i don't want to use 3000k for fog light either. hurts my eyes when i see people use hid for fog light and non projector light.



Thanks for your help.

[THAiPHOON]

Once again, np man! Glad to help.

I would stay away from HIDs in fogs too, unless you're doing, like you said, a fog light retrofit or something. Headlights will be bright enough in terms of visibility.

The bulb that I have currently is the stock halogen bulb that came with my Ebay kit. Since my fogs are tinted yellow, I think that is yellow enough already, but if my bulbs ever give out, I'm going to throw a set of H11 Nokya Hyper yellows in there.

[paperboy42190]

hey ga006959 i replied to your PM

[californium90]

After looking at paperboys idea i had done this mod too. I have pics of it with a DIY! Credits to paperboy aka george for helping me through the process. hopefully it helps.

here is the thread.

http://www.driveaccord.net/forums/sh...ad.php?t=47766

[ga006959]

So where do you guys get the Pigtail connector?
is there certain size all one size?

and where do i get them? Honda dealer or Autozone.
I am probably gonna go pick up one of OEM switch and see if they sell those connector.

[kaabob]

I'm also interested in getting those pigtails since all I have is an OEM switch and the ebay wires. Any help would be great, thanks!

[kickskid21]

Ok, I just got my fogs in from K2Motor and need this mod! My harness is different, so I need some help guys!

[ish nunez]

i was looking at this old post.. Im just got an oem honda foglight switch im trying to figure out what wire goes to each pin.. I looked at the photos but i can really tell whats what. I also have an ebay harness.. can some one help explane it better?

[sodaks2k]

Originally Posted by ish nunez

i was looking at this old post.. Im just got an oem honda foglight switch im trying to figure out what wire goes to each pin.. I looked at the photos but i can really tell whats what. I also have an ebay harness.. can some one help explane it better?

read this post

http://www.driveaccord.net/forums/sh...99&postcount=5

I'm not sure why the OP cut the connectors off of the ebay wiring. I left mine on, wrapped electrical tape around them, and connected them to the pins on the OEM switch.

[Fail City]

weird how a lot of people ran into problems with the fit of the switch, when i bought my first ebay fog light kit, with the aftermarket switch, it fit eventually and worked fine for about a year and half until i got rid of the car.

[ish nunez]

Originally Posted by sodaks2k

read this post

http://www.driveaccord.net/forums/sh...99&postcount=5

I'm not sure why the OP cut the connectors off of the ebay wiring. I left mine on, wrapped electrical tape around them, and connected them to the pins on the OEM switch.

Ill try that see what happens

[sodaks2k]

Originally Posted by Fail City

weird how a lot of people ran into problems with the fit of the switch, when i bought my first ebay fog light kit, with the aftermarket switch, it fit eventually and worked fine for about a year and half until i got rid of the car.

My ebay switch fell apart before I even installed it. I put it back together but within a week it would either stay stuck in the on position or when I tried to push it on it wouldn't click/stick in the on position.

[ish nunez]

Originally Posted by sodaks2k

My ebay switch fell apart before I even installed it. I put it back together but within a week it would either stay stuck in the on position or when I tried to push it on it wouldn't click/stick in the on position.

Mine did the same thing. Cheapass ebay switch.. Got An Oem One now that toke care of my problem