General Information
Year
2007
Make
Honda
Model
Accord
Color
Silver
Packages
LX
History
The previous owner did some modifications that I have fixed/removed:
-foglight wiring (I replaced their mickey-mouse harness with OEM)
-foglights... (they installed yellow ones, I reinstalled white ones)
-Loud muffler that didn't pass inspection (removed...)
-blue HID headlights that didn't pass inspection (removed...)
-Short ram "hot air" intake (replaced with OEM airbox)
-cheap aftermarket wheels (I bought some OEM alloys that I will be refinishing)
What I want to do in the future:
-TSX intake manifold
-Steering wheel (cover or swap. old one is worn)
-put new drums brakes in the rear, paint them black or gray so they don't rust
-foglight wiring (I replaced their mickey-mouse harness with OEM)
-foglights... (they installed yellow ones, I reinstalled white ones)
-Loud muffler that didn't pass inspection (removed...)
-blue HID headlights that didn't pass inspection (removed...)
-Short ram "hot air" intake (replaced with OEM airbox)
-cheap aftermarket wheels (I bought some OEM alloys that I will be refinishing)
What I want to do in the future:
-TSX intake manifold
-Steering wheel (cover or swap. old one is worn)
-put new drums brakes in the rear, paint them black or gray so they don't rust
2007 Honda Accord (Silver)
Modifications
Drivetrain
Resonator delete. Since I had to replace the saddening intake install the PO did, I installed an OEM airbox without the resonator. Mostly because I didn't want to pay for a resonator, and figured I didn't have to since deleting it is a common mod...
Interior
LED strip in trunk - replaced sad incandescent bulb
OEM winter floor mats & trunk tray
OEM winter floor mats & trunk tray
Exterior
LED license plate lights (better color)
LED door lights (much brighter!)
White foglight installation with OEM wiring harness
Grill mesh (to protect condenser from flying rocks)
Splash guards
LED door lights (much brighter!)
White foglight installation with OEM wiring harness
Grill mesh (to protect condenser from flying rocks)
Splash guards
Audio
Stock radio remanufactured after it became possessed (it was turning itself on and off...)
CB radio installed in the cubby under the head unit (all wiring hidden behind dash)
AUX input installed in armrest. I designed my own 3D-printed jack. That was one of my first experiences with 3D printing things, so I would probably do it a little different if I were to do it over. Either way, its there, and only noticeable if I told you to look for it.
Custom 4-port USB charger, can charge four devices up to 2A each! (my cell phone charges at the 2A, hence that decision.) Gray case designed by me and 3D printed in PLA plastic. Electronic guts bought on ebay. Tapped into accessory plug wiring. (see picture in Interior section)
Replaced front door and rear deck speakers
-front: Polk Audio DXi651s
-rear : Rockford Fosgate Prime R169X3
CB radio installed in the cubby under the head unit (all wiring hidden behind dash)
AUX input installed in armrest. I designed my own 3D-printed jack. That was one of my first experiences with 3D printing things, so I would probably do it a little different if I were to do it over. Either way, its there, and only noticeable if I told you to look for it.
Custom 4-port USB charger, can charge four devices up to 2A each! (my cell phone charges at the 2A, hence that decision.) Gray case designed by me and 3D printed in PLA plastic. Electronic guts bought on ebay. Tapped into accessory plug wiring. (see picture in Interior section)
Replaced front door and rear deck speakers
-front: Polk Audio DXi651s
-rear : Rockford Fosgate Prime R169X3
Wheel and Tire
General Altimax RT43 tires
OEM Alloy wheels to be refinished, and aftermarkets to be removed!
OEM Alloy wheels to be refinished, and aftermarkets to be removed!
Continue with Google
