Drive Accord Honda Forums banner
bushings
1-9 of 9 Results
  1. The 6th Generation
    It's way past time I did something about my suspension situation. Car is an 01 4cyl 5sp sedan with 240k miles on the factory original suspension. I've done some work up front - new struts/springs, upper arms/ball joints, lower ball joints. Front's behaving pretty well now. In the back, pretty...
  2. Wheels, Suspension & Brakes
    Hi. I have a 2010 Accord EX with 160k miles. I have some creaking noises when turning at low speeds. I found some play in the upper ball joint so replaced the upper control arm and ball joint with OEM replacements a few weeks ago. Most of the noise has disappeared but some remain. I now plan to...
  3. Wheels, Suspension & Brakes
    Replaced both lower control arms on my 06 SE about two years ago due to cracked compliance bushings. It’s been getting kind of sloppy feeling lately. I noticed the shock bushing is pretty ate up on the drivers side when was looking around under it the other day. The main arm bushings still look...
  4. Wheels, Suspension & Brakes
    So I'll be upgrading the suspension of my car and would like to know weather or not to go OEM or Aftermarket. Right now I'm looking at Ball joints, Control arms and along with that the Bushings. I've searched and learned that some people say go OEM or say go MOOG or to just stay away from MOOG...
  5. The 6th Generation
    Hello. Just bought a 1998 Accord with the 4 cylinder. The shifter is extremely sloppy and won't go into fifth gear, it's like it's not even there; as opposed to grinding or popping out. It's also extremely sloppy going into reverse, so I think it's cable shifted since the further to the right...
  6. Wheels, Suspension & Brakes
    Hey guys. I'm coming up around that time when my compliance bushings are due for replacement. Are there any aftermarket/reinforced/polyurethane options? heard through some minor reading that upgrades can last longer and improve handling. I'm an aggressive driver and sometimes track/autoX my...
  7. The 7th Generation
    So it's looking like my lower control arm bushing (right side) is going to need replacing soon. I read up on several threads in this forum and other sites, and I get the impression it may be a good idea to go ahead and replace both front LCAs and bushings. I would like to get new LCAs and...
  8. The 7th Generation
    The link below has a write-up on how I replaced the lower control arm bushings on a 2007 Accord 4CYL. http://www.scribd.com/doc/194891809/Replacing-Lower-Control-Arm-Bushings-on-a-2007-Honda-Accord I am curious to hear others' comments on: 1. When do you suggest replacing control arm...
  9. The 7th Generation
    I got a 04 accord sedan, and I'm getting these clicking noise in the rear passenger side every time I turn or go on a bump. Its a mixture of clicking and knocking. I pushed down on the rear(no noise came at all), and it didn't seem like it was the shocks. It is the swaybar endlinks or...
1-9 of 9 Results
Top