Drive Accord Honda Forums banner
camshaft
1-4 of 4 Results
  1. The 9th Generation
    My car was running weird yesterday and then I got a check engine light. was told there was an issue with the camshaft sensors and I needed to replace them. When I replaced both, the car died on startup. If I keep one old one in the back sensor and a new one in the front it seems to be working...
  2. Problems & Solutions
    hi everyone, 2000 accord 2.3l, 185x so i know how to do valve adjustments. but on my car, on certain valves (cyl 1 and 2, primary rocker arms), i cannot get the valve adjustments to stay put. for e.g. i adjust it to a certain spec, tighten it and when i rotate the engine and check it again...
  3. The 6th Generation
    hi everyone, 2000 accord 2.3L MT in the process of doing the timing belt, i got to the part where i had the covers off and had NOT yet removed the tension or the belt. so heres the situation: 1) crank was at tdc but 360 degrees off (i.e. i set it at tdc before removing upper cover as per...
  4. The 7th Generation
    Recently I purchased a 2003 Accord coupe with 2.4L and AT. As it has 105K on the clock I set about checking the tappet gaps. To my dismay I found that two of the cam lobes on the exhaust cam are worn - one has a square groove worn in it, the other seems to be wearing away (pics attached)...
1-4 of 4 Results
Top