Drive Accord Honda Forums banner
cv axle
1-6 of 7 Results
  1. The 8th Generation
    I am in the process of replacing both cv axels on my 2010 4cyl automatic. I noticed in the pictures of the passenger side cv, there is a little cup piece, like a dust shield?, that is on the end that connects to the intermediate shaft. The new axel does not have this. Do I remove it from the old...
  2. The 7th Generation
    I hear it mostly on right turns, especially when accelerating out of a right turn. At higher speeds it's also accompanied by some vibration in the steering wheel and it feels like there's play somewhere. You can see how the camera started shaking at the end of the video as I accelerated out of...
  3. The 7th Generation
    Hi, I replaced my drivers side CV axle with a rockauto cardone cv axle. Then I replaced my passenger side with O’Reilly’s Import Direct cv axle. Now, when I shift into reverse, there’s a huge clunk, and when I tap on the gas, there’s a snap as if something is snapping into place. I’ve replaced...
  4. Problems & Solutions
    2005 Honda Accord V6 3.0 I changed the driver side lower control arm over the weekend. Upon doing so, my cv axle slipped out and I couldn't get the lower ball joint in. After some online reading, I was able to slip the cv axle back into place and complete the installation. During...
  5. Wheels, Suspension & Brakes
    So I've been reading around on this forum for years now but this is my first time posting. I lowered my 2012 Accord V6 Ex-L Coupe on Tein Street Advance coilovers about 3 weeks ago and have been experiencing some shaking between 20-30mph while on the throttle. It becomes less noticeable, the...
  6. The 7th Generation
    I've got a 2005 Accord EX 4 cyl, 117K miles on it...with ABS. I'm getting clicking on both front ends when turning, and I know the driver's side had a small rip in the boot when the mechanic checked it out about a month ago. So he gave me the heads-up that would need some attention sooner or...
1-6 of 7 Results
Top