Drive Accord Honda Forums banner

egr valve

  1. The Early Generations
    okay so i moving to pheonix arizona and passing emissions is of the utmost priority i just replaced the egr valve and its still causing misfire codes when it activates ive blocked it off and i get no codes other than insufficient egr valve lift ive also went back to the vaccum control solenoid...
  2. The 7th Generation
    So my girlfriend has an 06 Accord EX, 4 Cylinder 2.2L. !!Replacing EGR Valve!! It all started about a month ago while driving: Every time she comes to a stop, the engine starts to run very rough. From time to time, the engine even stalls. Everytime the engine shakes, the rpm's drop a bit...
  3. The 7th Generation
    Then, I cleared the code and took it out for a drive. It ran perfectly and no new codes so far. I will update after more miles to let you know if this was a permanent solution, but so far so good! Hope this helps if you find yourself in the same situation.
  4. Problems & Solutions
    Hello to all, I'm in a desparate need for help on this matter. I have 98 accord LX V6 with 164k miles. Well, I took this car in for inspection and found out it failed. The reason was 1) P0401 code, and 2) check engine light bulb was missing. I came home and took the dash out and discovered...
  5. The 6th Generation
    I have a 2000 4 cylinder 4 door 5 speed with 185k. I recently had a CEL. Went to autozone and it was p0401, which is EGR insufficient flow. I took the EGR valve off and it really didn't look that bad. I sprayed it with carb cleaner and brushed/scraped off any carbon I could see. I also cleaned...
Top