Drive Accord Honda Forums banner
harness
1-12 of 13 Results
  1. Audio, Electronics & Lighting
    I'll just go ahead and ask... What happens if I don't connect the blue/white wire on my Metra harness to the BOSS harness? :) I can't locate the appropriate wire! :confused: @DIY Fan
  2. Audio, Electronics & Lighting
    Hi all, I’m posting my recent attempt to do this upgrade since the touring brake lights just look gorgeous compared to lower end trims. The initial motivation was simple — my 2020 Hybrid EX-L got rear ended and all major parts at rear had to be replaced / repaired. I have a good relationship...
  3. Audio, Electronics & Lighting
    I was getting close to completing an install for new components and amp and made a very careless mistake and cut the speaker wires in my harness too short. I soldered them back on but it's nearly impossible to get a clean enough connection to fit back in the harness. They don't want to lock back...
  4. Audio, Electronics & Lighting
    Hello all, I am new here. I have been making some small upgrades lately to my 2003 LX like changing out my headlight housings and spark plugs. Here is my issue though I am adding an aftermarket radio in my cubby and cannot seem to get the right radio harness. I have bought a few but none of...
  5. Audio, Electronics & Lighting
    Hello everyone! First post. Just picked up a 2014 Sport and i must say i'm in love. I'm an Electrical/Computer Engineer and i have plans on adding to the circuitry in this vehicle. I'm not about just splicing into the factory harnesses because i want to be able to remove any circuits i add and...
  6. Audio, Electronics & Lighting
    So i purchased Ebay fog lights and harnesses but cant figure out the wiring. Attached is two pics of the fog light harness installed partially and the switch harness that makes no sense to me. Any help is appreciated i als would like them to be hooked up the stock way as in with low beams but...
  7. Audio & Electronics
    Hi all! I need some help with upgrading my 2010 Accord LX to a 2008 Accord EX "Premium System CD Changer". I know that the premium requires the amplifier and that's fine as I'm looking to get an aftermarket one (including new speakers). The main issue I'm having is that the connection for the...
  8. The 6th Generation
    My wife's 98 accord car has had a power lock problem as long as she has had the car. This week while putting in a new door mirror, I noticed a couple things. The problem all along has been that the door lock switches never moved the driver lock, however when moving the door lock with your hands...
  9. Audio, Electronics & Lighting
    As all you guys know, the OEM harness cost a lost of money and doesnt allow us to have the fogs to be on all the time well. Here is a DIY with pictures and a step by step process of putting an OEM switch and getting it to work with the Ebay harness. CREDITS: Nickkx0x0 for helping me put my...
  10. The 8th Generation
    Well, as some of you know I bought the V-LEDs DRL Module and when trying to use them, they blew both of my fuses. I tried an alternative way of trying to still use them, and it was through the Harness + Resistor they offer on their website. These are the items...
  11. The 7th Generation
    So I bought Fog lights from Ebay and I'm looking at Inspire Fog housing. So I'm wondering how you guys will do it? The Fog light I bought comes with everything including the wiring harness, OEM switch, housing and the bulb. The Inspire Fog Housing is about $55 shipped. So should I get the...
  12. The 7th Generation
    Is the front end wiring harness easy to install? I'm having a problem with my A/C not working and it's because the compressor wont turn on, everything else is fine. For some reason, the signal is not getting to the compressor so I took it to the dealer so they can check what was the problem...
1-12 of 13 Results
Top