Search Results for ‘intake manifold’

So I currently have a 2013 lx-s and want to upgrade to a new throttle body and a new intake manifold. I know there is almost nothing out there but OEM parts from the J35/37 for the TB, and there is nothing for the IM. Below is an article from some civic forum and the guy fitted the J35 TB on...

Magnesium intake manifold off of a 2005 Honda Accord Hybrid. Fits 7th, 8th and 9th(?) gen 6MT Accords, and 5AT Accords with a little modification. Much lighter, better flowing and more resistant to heat soak than the stock 3.0 and 3.5 manifolds. It does not include a vacuum line for the active...

3.5L intake manifold taken off a 2005 RL. Perfect fit for any 7th, 8th and 9th(?) gen 6MT Accords, and fits with minor modifications on 5AT Accords. Flows much better than the stock 3.0 manifold, and should be a bit better than the stock 3.5 manifolds. The butterfly valve actuator is broken, so...

Hey, so i have an 05 Honda Accord, and i just got a j35 intake manifold to put onto it. But with the j35 manifold, there is an actuator for the flap that’s on the inside, but for my j30, I don’t have one… where am i supposed to plug it into? Also does anyone have any good ways to plan a cut for...

Just joined, after lurking for months. This is more of a "here's what I did" versus a "how do I do x" type of post. I've had my 06 EX sedan with the K24A8 and automatic transmission for about 8 years now, with my wife driving it for the first 6 and me inheriting it when we got her a new...

About to purchase the J37 Intake Manifold, P2R Intake Manifold Spacer, and Throttle Body Upgrade kit(s) from Heeltoeauto.com. And I wanted to ask you guys if the P2R intake manifold spacer would cause a clearance issue with the hood of the car? This is for a 2008 Honda Accord V6 Coupe

Hey guys. I’m new here, and I just got a 2017 accord lxs coupe and was looking for exhaust systems and found everything a bit overwhelming. I’m new to the whole Honda scene and not sure what will fit anyone have any advice as to a decently priced cat back system? Any help or advice will be...

I have a 2017 Honda Accord Coupe V6 automatic. Has anyone swapped the TL Complete Intake manifold OEM Factory 3.7 SH-AWD from a 2009 to the 2017 v6 accord automatic ?

I did the TSX intake swap. So I have the original part to sell. Double check but I believe this fits the '03 and '04 4 Cyl. Let me know if you have questions. A. What is for sale: '03 Accord 2.4 OEM part number intake manifold RAA B. Condition: Used C. Price: $50 plus shipping D. Location...

Well, this is embarrassing. I drive a 2003 LX coupe with 4cyl and just over 100k miles. I replaced the starter today. No issue there, she cranked right up. However, the engine is running rough, and the exhaust contains some white smoke/steam. :thumbsdow I know a little coolant splashed into...

Can I swap a k24a4 intake manifold with my k24a8 because the a4 has a throttle body spacer upgrade where as the a8 does not if anyone knows i would like to hear your thoughts

I purchased a 2007 Odyssey magnesium intake manifold for my 03 Accord V6 auto coupe. Now i need the top plate for a 08-12 accord v6 auto. Please let me know if anyone has one for sale. I don't know if we have a sponsor that gives us members a discount. I am a member of V6performance and...

Hey all, So I was wondering what some thoughts were on this product: http://www.autoanything.com/air-intakes/61A1951A0A0.aspx?kc=EFB1321&[email protected]&VehicleMakeName=Honda&VehicleModelName=Accord Few things, I already have a Weapon-R intake installed and i absolutely...

Finished installing the TSX intake manifold and throttle body, plus a P2R throttle body thermal gasket (thanks to throwdown). Will be ordering the IM thermal gaskets soon. Instead of pictures I just made a video of the finished product. Check it out. http://youtu.be/Gg3BbFlfrMY

The recent post on injection cleaners made me think of this, and see what you think of this. This summer while replacing the camshaft on my wife's 105K 2.4L '03, I had an incident with the cam tensioner and had to pull the head. I replaced the head, exhaust and intake gaskets. While looking...

I'm preparing to do the TSX Intake Manifold swap and I know there are some gaskets that should be replaced when I do it. So which gaskets should I replace? Just the IM gasket or also the throttle body gasket? And which one should I get? I have no idea which TB gasket to get. As for the IM...

I'm trying to find the best and cheapest 2004 tsx intake manifold i can find (it'll be great if you have bracket and throttle gasket). I'm located in NYC