Drive Accord Honda Forums banner

intake

  1. The 9th Generation
    Just bought a 2014 Accord lx-s coupe. 6spd manual, K24w, 49,000 miles, Black on black. I just had a 2015 civic lx sedan 5SPD manual with custom full 2 1/4 exhaust, intake and flash tune. It was totaled by someone trying to get in my lane. I loved that car. This I think I'm going to love even...
  2. The 8th Generation
    TLDR; How do remove resonator, want more noise? MAF Problem? I know this has been asked a billion times, but I haven't found a detailed video or post about where and how to remove the Resonater on a 2010 V6 Ex-L. I also scanned the repair manual and owners manual, maybe I am blind. I just...
  3. Performance
    About to purchase the J37 Intake Manifold, P2R Intake Manifold Spacer, and Throttle Body Upgrade kit(s) from Heeltoeauto.com. And I wanted to ask you guys if the P2R intake manifold spacer would cause a clearance issue with the hood of the car? This is for a 2008 Honda Accord V6 Coupe
  4. Performance
    I know there are some tuners for Hondas such as Ktuner and hondata, but wondering if anyone has seen the Ham Burger Motorsports tune for Honda's new turbo motors. I had a JB4 along with BMS intakes in my 335i and it was amazing.
  5. Performance
    Hi Guys, i just joined the forum.. have couple of issue in my car. I recently installed the cold air intake pipes and universal air filter in my 2012 accord but when I am accelerating its jerking between 2000 - 3000 rpm, don't know what could be the issue as there is no check light. Installed...
  6. The 7th Generation
    Specs: 05 Accord Coupe K24A4 engine w/ aftermarket custom short ram air intake (this car came with CA emission sys) Miles: 154k I recently got a MAF low voltage input (P0102) code. AutoZone recommended that I change my MAF sensor so I did. With the new sensor, the check engine light turned off...
  7. Performance
    Cleaned my K&N Filter with the recharger kit (99-5000) Instructions were straight forward. Tried not put on too much oil after the cleaning, so I may have to go back and touch up some of the darker spots. Car sounded like it breathed better after I put it back on but who knows. Just happy to see...
  8. Performance
    I've got the RV6 HFPC, and ATLP J-pipe to the quad exhaust with the third cat delete. I bought ktuner a while back but haven't gotten around to installing it. When I did hook it up I think I saw something about the basemap being for I/H/E....or that could have been a youtube video. Anyone...
  9. The 6th Generation
    I'm finally giving Dirty Girl the TLC she needs, and she's not AS dirty anymore! So, I figured, why not make a thread for her? :) I installed a lot of what is in this box, and more needs to get installed still. Driver side spray nozzle It's hard to see, but you can see the hyper...
  10. DriveAccord Classifieds
    Hello, I am looking for a Takeda or K&N SRI intake for a 2016 honda accord 2.4L. I am located in Vancouver, BC and do not mind paying for shipping for the right price. Thanks!
  11. Performance
    Hi all, new forum user here so excuse any "noobness". I just recently bought a 2015 v6 coupe and am looking to upgrade performance but also sound on a budget (if possible). So a couple things i'd like addressed to the best of anyones ability, the more info, the better. 1. Best exhaust for...
  12. The 9th Generation
    i just got a 2013 v6 coupe and i have my \Takeda SRI from my old 09 coupe and i wanna know if it will fit or do i have to try and sell it and get one thats made for the 9th gen
  13. DriveAccord Classifieds
    Just wanted to throw up my HPS short ram intake. It has only been used for 5000 miles, and sounds absolutely fantastic (very throaty and deep sound). In very good condition, with the K&N filter that the kit comes with, plus a dry charger sock to cover the filter (not necessary for an sri but I...
  14. Performance
    Hey everyone. I recently purchased a cold air intake kit off ebay for my '12 EX sedan. I decided to do short ram since I live in upstate NY and get a lot of snow and rain. The kit I bought came with a filter but I decided to get a Spectre filter so it has something a bit more substantial than...
  15. The 8th Generation
    I know this has been talked about ad nauseam, but I’m pumped and I thought I’d share. Just installed the Takeda sri. The install wasn’t complicated, but it did take me almost 2 hours because I had trouble getting off the old coolant line. I had to pinch the clamp with vice grips and push the...
  16. Performance
    Sooo I have a 2011 Honda Accord Sedan LX 5-spd Manual. I tried to get a K&N intake for my car but I cant. Reason being that my model car is California Emission which is kinda bull. Anyone else have this issue?!!?
  17. Performance
    Trying to figure out which intake to get. Not worried about making more power or anything. Just want to get the one which is the loudest and maybe even a whistle when you let off the throttle? I've found a bunch of videos on youtube of the takeda's but none for Injen. My buddy has a cobb...
  18. The 8th Generation
    So I've had the idea to wrap both my intake and exhaust pipes with various materials to control engine bay temperatures. When it gets a bit warmer, I'm going to be wrapping my intake with Reflect-A-Gold and wrap my exhaust downpipe with Titanium Exhuast wrap. This also got me thinking of...
  19. DriveAccord Classifieds
    A) FS: K&N 69-1209TS Silver Performance Intake Kit I know this will fit a 7th gen 4cyl sedan, double check the part #s for your car! B) Used, had on the car for about 10k miles. Please see the pictures, there are a couple parts that were from my car, opposed to from the kit. It should...
  20. The 8th Generation
    I just recently installed a takeda sri intake in my car and a little after my engine light came on. At first i thought the mass air sensor could be loose but that wasn't the problem. I got the code for it after that and it was P0443 which is Evaporative Emission (EVAP) Canister Purge Valve...
Top