Drive Accord Honda Forums banner
sway
1-6 of 6 Results
  1. Wheels, Suspension & Brakes
    I have a 2016 Accord Sport with original rims and about 1yr old tires (235/40/19 Conti PureContact). This past fall/winter I've changed my brake pads and rotors and also did the usual tire rotation. For w few months I haven't driven on the highway and the street driving was fine, just the...
  2. Wheels, Suspension & Brakes
    So I saw an older post about putting TL TypeS sway bars on a 4dr or coupe. I took the plunge after going on a on ramp and having massive under-steer So I went to www.acurapartsworld.com (they have a flat rate $6 Shipping charge). I got: Rear (20mm) 52300-TK5-A02 SPRING, RR. STABILIZER...
  3. Wheels, Suspension & Brakes
    Did mine Sunday. PSA...the front was a b!+¢#. I ended up dropping one corner of the subframe and removing the exhaust downpipe. If someone has a better way, please share....because I couldn't find it after searching. Maybe its buried in that "Suspension Discussion" sticky, but that thread is...
  4. Wheels, Suspension & Brakes
    So I've had the TSX rear sway bar installed for a while now and like it a lot. I'd like to move up to a stiffer 19mm now and was considering the Underground Racing 19mm bar but then realized I can get one from a 2009+ Acura TL for way cheaper. However, there have been a few posts with people...
  5. The 7th Generation
    I got a 04 accord sedan, and I'm getting these clicking noise in the rear passenger side every time I turn or go on a bump. Its a mixture of clicking and knocking. I pushed down on the rear(no noise came at all), and it didn't seem like it was the shocks. It is the swaybar endlinks or...
  6. The 6th Generation
    I am going to replace the sway bar link in the driver's side tire in the near future. I took off the old one and it looks like it's going to be damn near impossible to tighten the sway bar link to the lower control arm because you can't fit an open wrench into the lower control arm to use both a...
1-6 of 6 Results
Top