throttle body

I own a 2004 Accord Ex coupe 4 cylinder manual. I recently had to replace my clutch And throttle body. I managed to change both but now when I go to turn my car on it instantly jumps to 3k rpm. Any suggestions.

If you know the 7th gen Accords then you'll enjoy this rabbit hole I'm going down! 2006 Honda Accord 4cyl 2.4L LX-SE. 190k miles, this is my girlfriends car, runs great. It's taking about 2.5 seconds of key cranking before the Accord turns over and starts. If it's a cold morning and the car has...

Hello! I received my 1998 Honda Accord with a strange rig that I need help with. The throttle position sensor has a bad ground, so the previous owner made his own ground (white) by connecting a wire to the frame of the car, then exposed the ground wire (green) that goes to the throttle position...

This Forum is great! I own a 97 Honda Accord, the Bottom Hose Fitting (elbow type) Underneath the Throttle Body has rotted out and broke when we took off hose to inspect. My Question, do I need to replace the Entire Throttle Body? Or can that hose fitting be replaced , screwed out , screwed in...

So my engine light came on and my bro suggested I clean the throttle body out before spending money on air sensors, I have 112K miles on 2013 Accord (4 cyl). With car off I had my son step on the gas pedal thus opening the valve. He got distracted (shocking) and took his foot off the...

I have a 2009 EX-L 4cyl AT. Call me an idiot, I know, but I used brake cleaner to clean my throttle body. Ever since this the car has been running weirdly, especially the way it shifts. When I'm slowing down to a stop it downshifts rough, lurching the car forward, or if I let off the gas at slow...

Hoping to get some resolution with what has become some hesitation issues and the computer dropping my car into "limp mode". Some quick background. 2007 Accord, V6, MT. I have noticed some subtle hesitation while driving and maintaining speed/rpm, whether at low speeds or high speeds, but...

Hey guys. long time reader. new to posting. I need some REAL Accord expertise as I cant seem to figure this one out. (sorry for the long read in advance. Ill try to keep it brief) 2008 Honda Accord EXL V6 So there was oil leaking somewhere around the Vtec solenoid and the oil was dripping...

Hello, I just recently purchased a 2015 Accord Sport 2.4L. I would like to add some performance with out breaking the bank. I was looking into a throttle body spacer and a K&N Cold air intake. Please let me know your opinions and the pros/cons to these items. This is my 1st Honda ever. Feedback...

Recently I decided to do the 3M intake cleaning, of which step 2 required removal of the throttle body to spray the cleaner on the back side of the throttle plate. I was quite surprised to find coolant hoses attached. Not ready for this, some leaked on to the floor. Here's what needs to...

Hey I am getting ready to do some upgrades to my car early this summer and am looking for any advice that I can get. Here is what I am currently working on doing: TB+Manifold Upgrade (This idea came from @ccord10. It has been helpful to see how he has done this on his car.) TB options...

Hey guys, I'm back once again with a question I couldn't find the answer too on google. Hoping your expertise could help me out a bit here. Anyway, some guy local is parting out his rsx type s and is selling the intake manifold and throttle body for decent price. Now I know that rbc intake...

Hello, Honda Accord 2002 V6 Coupe 3.0L: I'm trying to take the IACV out for cleaning but since the IACV is attached beneath the throttle body, I have to take the TB out first. I read that there are only 4 bolts (actually 2 nuts on top and 2 bolts on the bottom) I need to take out. But after...

Can I paint the stock throttle body if I tape it off everything and use a high temp epoxy paint? I'm taking it nearly completely off anyway for a spacer recently purchased, I figure now's better time than any. I did a brief search and came up with little. Thoughts and comments please. Thanks

Finished installing the TSX intake manifold and throttle body, plus a P2R throttle body thermal gasket (thanks to throwdown). Will be ordering the IM thermal gaskets soon. Instead of pictures I just made a video of the finished product. Check it out. http://youtu.be/Gg3BbFlfrMY

Im trying to find some performance parts to gain some hp but not sure wat to get i hav 300 to 400 to buy some things but not sure what to get Im thinkin about some headers but that would b about all i could get i need a cold air intake but wat else could i get...would a new throttle body do...

I have a Black work racing throttle body I'm looking to install on my 09 exl 4 cyl. Any tips or information to help ease the process? Here's a link to the Throttle Body. Let me know what you think Thanks.

I've just recently started getting into tuning. I've only had my 6-6 for a few months now. I have a Takeda SRI and just ordered a P2R throttle body and 1 throttle body gasket last night. After doing some reading this morning, my question is: Should I have ordered 2 gaskets???

Hello All, My car just came out of 30k service at Honda Dealer. They recommended Change of Cabin Air Filter which I changed myself. The next recommendation was "Throttle Body Service". Can anyone put some light on how do I do it myself or need to get back to Dealer to do that. It's going to cost...

I'm preparing to do the TSX Intake Manifold swap and I know there are some gaskets that should be replaced when I do it. So which gaskets should I replace? Just the IM gasket or also the throttle body gasket? And which one should I get? I have no idea which TB gasket to get. As for the IM...