Drive Accord Honda Forums banner

turn signal

  1. Audio, Electronics & Lighting
    Hi everyone, this is my first post on DA, so please bear with me I recently purchased a used 2009 Honda Accord EX-L V6. Before purchasing, I noticed that the right turn signal would blink 2x as fast as the left. I initially thought this was a dying/incorrect bulb that simply needed to be...
  2. Audio, Electronics & Lighting
    I'm planning to install Switchback LED turn signal bulbs, but the problem is attaching a resistor to it. I've taken a photo. Which wire is Running Light wire and which one is the Turn Signal light wire? Red wire - ?? black - ground? Brown wire - ???
  3. The 8th Generation
    Fellow DA members, I purchased a pair of Switchback LED turn signal bulbs for 2012 V6 EX-L Coupe, from Diode Dynamics, who are amazing, Mike was really helpful with the purchase.:thmsup: I trusted my brother to take it to his pal's garage to have my HID's, LED fogs, LED sidemarkers and...
  4. Audio, Electronics & Lighting
    I have a 2007 Accord Coupe. I bought aftermarket headlights that came with new turn signal sockets thingies and bulbs (why they couldn't make the hole 2mm wider to fit the stock size bulb I certainly don know :thumbsdow) The stock turn signal bulbs were 12v 27/8w. The new turn signal bulbs are...
  5. Problems & Solutions
    I had White/Amber Yellow High Power Switchback 1157 form ijdmtoy, with the 6 ohm 50 watt load resistor for hyper flash fix. After turning the turn signal off, it takes the lights about 2s-4s to switch back on. I recently upgraded to the 50 Watt Cree Led White-Amber Switchback Bulbs AO and 6 ohm...
  6. The 6th Generation
    New poster but longtime user - also a diesel mechanic/biofuels guy 1999 EX VTEC 5 Speed, 201K odo. Since I've had the car it's had: No Horn, No Cruise, SRS on. 1st repair Attempt: Replaced clock spring following method outlined here (easy). Result: Now Horn does work but SRS light still on...
  7. The 8th Generation
    I have read several posts and have a basic understanding of the issues with led lights. I understand that they require a resistor in order to avoid hyper flash. I also understand (possibly incorrectly) that they are required on the signals circuit. I'm installing LED front turn signals...
Top