Drive Accord Honda Forums banner

Accord 08 Temperature and Fuel guage

1149 Views 5 Replies 3 Participants Last post by  teezythakidd
Hi there,

I am having a problem with my 08 accord. It seems that the needles for temperature and fuel guages have "fallen below" what one would expect to be their normal resting position. When i turn my car off, the fuel guage needle which should be pointing to "E" mark actually rotates all the way back until it almost touches the trip reset button. Similarly the temperature guage is way off its resting position. When the engine is heated up the Temp guage needle does move but it is not showing the correct indication since its starting position was not correct, similarly when the fuel tank is full the gas guage needle only goes up half the way.

Anyone has any idea what the problem maybe?

I have tried running the front panel diagnosis and the the drive circuit seems to be working fine.

sorry for my bad english
1 - 2 of 6 Posts
Is it possible the motors that drive the needles have rotated? It sounds like the gauge cluster needs to be taken apart to see what's up.
When the dealership plugs in to you car they'll be able to run the gauge function test that will move all the needles over their full range.

It sounds like the pegs broke off your gauge cluster?
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top