Drive Accord Honda Forums banner

DIY: Front Brake rotor/pad replacement & brake fluid change - videos

17K views 4 replies 3 participants last post by  Edaccord08 
#1 ·
Here are a couple more videos that I shot this weekend.

1. Front brake pad & rotor change, plus lubing slider pins

VIDEO 1


2. Complete brake fluid flush, using MityVac 6835.

VIDEO 2

Enjoy!
 
#2 ·
Here are a couple more videos that I shot this weekend.

VIDEO 1 - Front brake pad & rotor change, plus lubing slider pins

VIDEO 2 - Complete brake fluid flush, using MityVac 6835.

Enjoy!
just curious what kind of compressor pump do you have , I don't think you need much of airflow for this .

I have been using Mityvac hand pump (8500 ?) which have added adapter to be able to check/use vacuum or pressure .
That works good if you don't have airpump at home .

I like the filler reservoir to keep fluid level right .
 
#3 ·
I've got an Ingersoll Rand 20 gal. However, the bleeder doesn't need a bunch of air volume....and it can handle a range of 60-150 PSI. I bet one of those little 2/2.5 gal compressors could run it, no problem.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top