[dan7u]

Ordered some fogs and got what seems to be a replica OEM harness. It has the 3 pins that go into the 14/20 pin connector and two unstripped wires that I think go into the 3-pin connector wrapped in blue tape. Any one have this harness? The colors of the wires are different than the ones in the OEM instructions, so I don't know which wires go where.

edit: Fogs are for a 2-dr 03 from seller edixworks

 

[paperboy42190]

oem instructions wont help you out for anything except oem harness. as far as i know, no ebay foglights has a harness that is identical to OEM.

 

[dan7u]

The harness looks pretty much identical. It has two relays, and 3 pigtails that go into the 14/20 pin connector. The only thing it's missing is a connector for the two wires that probably go to the connector with the blue tape. Problem is, the colors don't match the colors of the OEM wires. This is all for the engine side. The switch side was pretty straight forward.

 

[Need4Speed808]

Can you post pics of your Ebay fogs + harness???

 

[dan7u]

Hmm, I'll try to get pictures. The fogs and harness look almost identical to the OEM replicas.

It looks kind of like this:

Fog1---Ground---Fog2---2relays---5 wires (3 with pins, 2 unstripped)