Drive Accord Honda Forums banner
1 - 6 of 12 Posts

· Registered
Joined
·
166 Posts
Discussion Starter · #11 ·
do you have picture on the back of the garnish?
No i don't, but i believe inspire08 posted a picture of the back of the garnish with the HONDA >ABS< logo printed on the back of it on the $395 inspire kit shipped thread.

You might wanna readjust the reflector on driver side. From the last picture, the reflector is popoing out right below the "stanley" area, maybe I should say the garnish is falling in and not lined up with the reflector, you might wanna stuff it up at the bottom.
alright thanks for that, so would i have to stuff something on the bottom of the garnish? or under the reflector?

^yeah.. there is a bit of a gap there. looks good overall, im on the fence about getting this mod done or not.. lot of site members seem to be getting this, but no one in my area.. so thats a plus!
You should get it! changes the whole rear end of the accord, looks way better if you have a decklid spoiler installed already, or the JDM replica spoiler from Stephen83 :]

We're working backwards from each other LOL
My "Stephen83" JDM replica lip. I gotta take better pics, a reflection makes it look higher on the far corner. Hey did the Ebay seller send you that already painted? Ad I last saw says you get a black or gray, no choice.

Haha,
nice lip spoiler! now you should get me one for christmas :thumbsup:
haha, yeah the garnish was already painted, but not in USDM color matched, you have to have it repainted. Now its your turn to get your inspire kit, and we can all meet up in fresno one day :banana:
 

· Registered
Joined
·
166 Posts
Discussion Starter · #15 ·
the reason why it has a gap on the right reflector from the driver side is because the maaco guys didn't align the garnish correctly, if you look at it in person the right side is higher then the left. I'm going to go back to them and have it fixed.

All i need to do now is find some light bulbs and wires, having trouble doing that..

This will explain why it doesn't fit right, I didn't do anything on mine and it fits perfectly. The reflector shall sits about 1mm deeper all the way from one end to the other end.

Anyway, it's a nice conversion.
I've found out why the right reflector doesn't look right, its because they added a spacer above the reflector which was suppose to sit in more into the trunk, but its right above the reflector, and that caused the reflector to like settle lower then how its suppose to be, and if you look at the bottom of the reflector in person, its sticking out, they didn't do a really good job installing it..
 

· Registered
Joined
·
166 Posts
Discussion Starter · #27 ·
Very nice. Im jealous, still waiting for mine. Did yours came wit the harness and foam?
It came with the 2 reflectors, garnish, and 1 light fixture.

Guys, its a installation error, the whole garnish kinda squeeks when i try to close it too, they didn't install it properly.. I'm going to go back 2moro and have it fixed.. Hopefully.

can u fit bulb on both these light or just the passenger side.
I found that some place was selling this inspire kit but only had design for passenger side with bulb and the driver side with no hole to insert the bulb....
Yes, you can fit a bulb on the driver side of the reflector, but on the passenger, you would have to cut a hole into it.

I'm trying to get some bulbs and wires for the reflectors, can anybody help me out??
 
1 - 6 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top