Drive Accord Honda Forums banner

61 - 80 of 98 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter #61
Do you guys have a rough ETA on when pre-orders may be available?
Nothing set in stone just yet, but we're hoping toward early Spring. It's tough to give any thing exact at the moment since it still depends on our testing results and the manufacturing process, but we should have a clearer picture once we finish up the testing!

-Nick
 

·
Registered
Joined
·
182 Posts
Man us 1.5 guys always get the shaft! But I understand that the 2.0 is the performance engine and is a de-tuned Civic Type R and you go with what you know....performance! I’ll be waiting patiently and exploring options when the time comes to help get more performance out of the 1.5. No, tunes aren’t for me.

Thanks for what you do!
 

·
Registered
Joined
·
24 Posts
Stop teasing!!!
I'm ready to purchase an intake but I'm holding out until I see your offering to make my decision.
 

·
2.0T
Joined
·
43 Posts
Waiting for this as well...

I know it may be early in the game, but will you guys offer a group buy for our forum once the intake becomes available?
 

·
Registered
Joined
·
94 Posts
Discussion Starter #69
Waiting for this as well...

I know it may be early in the game, but will you guys offer a group buy for our forum once the intake becomes available?
That's a great question! We'll be offering a discounted presale that will be open for about 3-4 weeks before shipping of the intake kit.

-Nick
 

·
Registered
Joined
·
94 Posts
Discussion Starter #70
Hey Guys!

Coming in right before the end of the year with an update on the 2.0T kit! As always, make sure to head over to the Engineering Blog for the full look!



Our new intake design sits ready to be tested on our Dynapack system, but first we wanted to give you a tour of the production sample of the upgrade to the K20C4's respiratory system.



Naturally, I'm only going to tease you here, so head to the Blog for the full look!

-Nick
 

·
Registered
Joined
·
33 Posts
Hey Guys!

Coming in right before the end of the year with an update on the 2.0T kit! As always, make sure to head over to the Engineering Blog for the full look!



Our new intake design sits ready to be tested on our Dynapack system, but first we wanted to give you a tour of the production sample of the upgrade to the K20C4's respiratory system.



Naturally, I'm only going to tease you here, so head to the Blog for the full look!

-Nick
Do you guys have an estimated date when it’ll be available for purchase?
 

·
Registered
Joined
·
94 Posts
Discussion Starter #73
Any plans on a 1.5?
We're still evaluating the 1.5T kit, but I'll be sure to keep you updated on that once I have info for you!

Do you guys have an estimated date when it’ll be available for purchase?
We're aiming for an early spring presale, but that is subject to move around since we're not quite finished up with our testing. I'll be sure to keep you guys in the loop!

-Nick
 

·
Registered
Joined
·
9 Posts
We're still evaluating the 1.5T kit, but I'll be sure to keep you updated on that once I have info for you!



We're aiming for an early spring presale, but that is subject to move around since we're not quite finished up with our testing. I'll be sure to keep you guys in the loop!

-Nick

Any updates on the 2.0?
 

·
Moter Nature Will Evict U
Joined
·
74 Posts
Interesting - Doesn't look to be Raising MAP Up or lifting it Higher out of the Air Stream - to Obtain Better Air/Fuel - Ratio so Larger ID and Any - Spec's Yet ?

Thank You ~

Sq In. of Filtering vs Stock ?

Ram Effect ?
 

·
Registered
Joined
·
94 Posts
Discussion Starter #78
Interesting - Doesn't look to be Raising MAP Up or lifting it Higher out of the Air Stream - to Obtain Better Air/Fuel - Ratio so Larger ID and Any - Spec's Yet ?

Thank You ~

Sq In. of Filtering vs Stock ?

Ram Effect ?
So when it comes to MAF based vehicles, we're aiming to engineer our intakes to provide an improvement as a direct bolt on, so we make very minimal adjustments when it comes to the housing. This way the fuel trims are kept in check, you stay CEL free, and you still have the potential for even more power when/if you decide to go with a tune.

Our filtration area is about 95.7 square inches, which is a 53% improvement over stock. We're also straying from adding a ram effect to these intakes as well, since that can also skew the MAF readings.


Please DM me when the pre-sale starts so I can ensure I sign up. Any updated ETA on that?
Make sure you keep an eye on this thread since we'll be making the announcement here. Your best bet would be to subscribe so you'll get an alert to your email when the thread gets updated ;)

-Nick
 

·
Registered
Joined
·
94 Posts
Discussion Starter #80
Hey Guys,

I just wanted to bump this up since it's been a bit of a gap since our last update. We're still plugging away at our intake kit, and made some revisions before we launch our presale. Keep an eye out for more to come soon!

-Nick
 
61 - 80 of 98 Posts
Top