Drive Accord Honda Forums banner

My Advics (An update and upgrade)

462 Views 10 Replies 5 Participants Last post by  RobRac
I wanted to have my caliper screws sanded and clear coated but they didn't hold through one more winter. Apparently they are not meant for this:

I decided to replace them with stainless steel ones but I couldn't find any in the proper size on my market so I invested in titan screws from AliExpress:

They've got a bit smaller flanges but still look much better than those rusty ones:

See less See more
  • Like
Reactions: 1
1 - 1 of 11 Posts
Nice looking bolts.
Surface rust is not a big deal. If the main concern is about looks, clean and spray some WD40, Fluid Film, or even a thin coat of clear paint on them. They should stay rust free for a few years.
1 - 1 of 11 Posts