Drive Accord Honda Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
45 Posts
Beware of unintended consequences. I installed a stiffer roll bar on my 1G TSX. It made a nice impact on the handling. But about 4 years later i start to hear a clunking sound coming from the rear and the handling is bad. The new bar put too much stress on the attach fitting and it eventually cracked through. I found a suspension guy to weld in a patch, it was not a major repair, but the stock attach points might not be up for the added stress. You might want to check for cracks after a year or so.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top