Drive Accord Honda Forums banner

XXR 531 19x8.5 - 19x10 Help Please

3470 Views 8 Replies 3 Participants Last post by  LB8G
First let me say hello. I am not new to driveaccord per say. I have been using this site for a while but never made an account.

My wife has a 2011 BBP Coupe V6 and is wanting some wheels for her car. We bought the car brand new December 2010 and it currently has 7K miles. The car is super mint and she loves it and is looking to keep the modding going. She had the HFP body kit installed but not the suspension. Stock suspension.

Her question is how will the XXR 531s (platinum) fit with the following setup:

Front - 19x8.5 +35
Rear - 19x10 +35

I believe this is the only mid range offset they offer in these sizes. Any have any insight on whether they stick out or be close to fender flush or if well need aftermarket suspension to make these work? Preferably no suspension modifications are wanted but she may have to compromise somewhere to get what she wants.
1 - 3 of 9 Posts
It'll fit, especially on stock suspension, but imo it'll look weird running a staggered set up not lowered.

Im running a 35 offset on mine and its pretty flush.
My set up is

245/35 19x8.5 Front 35 offset
265/35 19.9.5 Rear 38 offset

Lowered on Eibach Pros 1.5 all around. Absolutely 0 issues, and I'd say its pretty flush.
From the wheel well it goes straight down to the ground looking behind the car, Even with a slight camber in the rear
1 - 3 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.